暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 ECC registered RDIMM module, no heat spreader

OWC

OWC 16GB DDR3 1333 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM for SuperBlade 7126T 7226T

SKU CH-D6XP-3P7RQ

16 GB DDR3 1333 ECC registered RDIMM for Supermicro SuperBlade 7126T and 7226T servers

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB

  • ECC registered design protects data integrity in servers
  • 16GB capacity extends SuperBlade 7126T and 7226T performance
  • DDR3 1333 CL9 speed matches system requirements
  • 240-pin 1.5V RDIMM fits registered memory slots
  • Single 2Rx4 module simplifies upgrade installation

Server ECC RDIMM Upgrade

This 16GB DDR3 1333MHz CL9 registered ECC module is built for Supermicro SuperBlade 7126T and 7226T series systems. It operates at 1.5V with a 2Rx4 rank configuration on a 240-pin form factor. The part replaces Supermicro MEMDR316LSL05ER13 and is validated for workstation, server, NAS and router platforms.

Replacing Standard DIMMs

Registered ECC memory cannot be mixed with unbuffered modules and will not work in standard desktop computers. The upgrade is worth it when extending the service life of existing SuperBlade infrastructure or when building new server capacity with validated OWC modules that meet JEDEC and RoHS standards.

Suited for Blade Server Builds

This module suits administrators maintaining or expanding Supermicro SuperBlade 7126T and 7226T deployments. It is not for desktop PCs, consumer laptops or any system that requires unbuffered non-ECC memory. Buyers needing different capacities, speeds or form factors should look at other OWC server memory options.

特長

  • ECC registered design protects data integrity in servers
  • 16GB capacity extends SuperBlade 7126T and 7226T performance
  • DDR3 1333 CL9 speed matches system requirements
  • 240-pin 1.5V RDIMM fits registered memory slots
  • Single 2Rx4 module simplifies upgrade installation

仕様

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7126T Series
Supermicro SuperBlade 7226T Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 240-pin DDR3 RDIMM fit the memory slots in a Supermicro SuperBlade 7126T or 7226T?

Yes, the module is a 240-pin DDR3 ECC Registered DIMM built to the JEDEC standard for those SuperBlade series.

What is the correct way to seat this ECC Registered RDIMM in the blade server?

Align the notch on the 240-pin edge connector with the slot key, press straight down until both retention clips click, and do not mix it with unbuffered memory.

When should the 16GB 2Rx4 module be replaced in a SuperBlade 7126T or 7226T?

Replace it if memory diagnostics report correctable or uncorrectable ECC errors, if the blade fails to POST with the module seated, or when you upgrade to a platform that requires a different DDR generation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。