暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 ECC registered DIMM with black chips

OWC

OWC 16GB DDR3 1333 ECC Registered RDIMM 2Rx4 CL9 1.5V 240-pin 1R3D32R416GB

SKU CH-TDN3-R3KWV

16 GB DDR3 1333 ECC registered RDIMM for Supermicro 1026, 2026 and 6016GT servers

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB

  • ECC registered design prevents data errors in critical workloads
  • 16GB capacity extends server memory for virtualisation and databases
  • DDR3 1333 CL9 timing matches Supermicro 1026 and 6016 series specifications
  • 2Rx4 registered organisation stabilises signal integrity on multi-DIMM channels
  • 5V JEDEC standard voltage ensures compatibility without configuration changes

OWC 16GB DDR3 1333 ECC Registered RDIMM

This OWC memory module delivers 16GB of DDR3 1333 (PC3-10600) capacity in a single 240-pin registered DIMM. It operates at CL9 latency with a standard 1.5V supply and includes on-board ECC for data integrity. The 2Rx4 dual-rank organisation suits server and workstation platforms that require registered memory.

Targeted at Supermicro SuperServer operators

The module is validated for Supermicro SuperServer 1026GT, 1026T, 1026TT, 2026TT and 6016GT series systems. It will not work in standard desktop computers that accept only unbuffered non-ECC memory. Buyers who need unbuffered DIMMs for consumer motherboards should look at a different product line.

Registered ECC DDR3 240-pin form factor

This stick uses the registered ECC DDR3 240-pin interface, which is electrically incompatible with unbuffered desktop slots. The single specification that decides fit is the registered ECC DDR3 240-pin form factor; only systems designed for that exact memory type will accept it.

特長

  • ECC registered design prevents data errors in critical workloads
  • 16GB capacity extends server memory for virtualisation and databases
  • DDR3 1333 CL9 timing matches Supermicro 1026 and 6016 series specifications
  • 2Rx4 registered organisation stabilises signal integrity on multi-DIMM channels
  • 5V JEDEC standard voltage ensures compatibility without configuration changes

仕様

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 1026GT Series
Supermicro SuperServer 1026T Series
Supermicro SuperServer 1026TT Series
Supermicro SuperServer 2026TT Series
Supermicro SuperServer 6016GT Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR3 1333 PC3-10600 interface actually run at in a Supermicro server?

The module operates at 1333 MT/s with CL9 latency at 1.5 V, matching the PC3-10600 JEDEC rating for registered ECC DIMMs.

Will the 240-pin registered DIMM fit the Supermicro 1026GT, 1026T, 1026TT, 2026TT or 6016GT memory slots?

Yes, the 240-pin DDR3 RDIMM form factor is the exact slot type used across all listed Supermicro SuperServer series.

How do I install the 16 GB 2Rx4 RDIMM without triggering a memory error?

Power off the server, open the chassis, align the notch on the 240-pin edge connector with the key in the slot, press firmly until both retention clips click, then power on and verify the full 16 GB appears in BIOS.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。