暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, thin rectangular SODIMM module

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 260pin Non-ECC SODIMM for Dell OptiPlex 7040 Micro memory upgrade

SKU CH-DCEE-MH98G

A 16 GB DDR4 SODIMM running at 2133 MHz CL15, validated for Dell OptiPlex 7040 Micro systems

  • Capacity16GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 16GB capacity lets you run more applications simultaneously
  • 2133MHz DDR4 speed matches Dell OptiPlex 7040 Micro specifications
  • CL15 latency and 1.2V voltage meet JEDEC standards
  • 260-pin SODIMM form factor fits the Micro chassis exactly
  • 2Rx8 unbuffered non-ECC design ensures stable operation

Compatible Dell OptiPlex 7040 Micro upgrade

This 16GB DDR4 SODIMM is built specifically for the Dell OptiPlex 7040 Micro. It uses a 260-pin form factor and runs at 2133MHz with CL15 latency. The module is non-ECC and unbuffered, matching the original system requirements exactly. It suits owners who need more memory for daily multitasking.

Steady operation at rated speed

The module operates at 1.2V and conforms to JEDEC PC4-17000 specifications. Because it is validated for the target platform, it maintains its 2133MHz data rate during extended workloads without throttling. The dual-rank 2Rx8 organisation supports consistent throughput for office applications and light content creation. It is not intended for systems that require ECC error correction.

Straightforward slot installation

The SODIMM inserts into the single memory slot accessible under the OptiPlex 7040 Micro chassis cover. No tools beyond a small screwdriver are needed to open the case. The low-profile design clears the compact internal layout without a heat spreader. Builders who need more than 16GB total capacity cannot expand further on this platform.

特長

  • 16GB capacity lets you run more applications simultaneously
  • 2133MHz DDR4 speed matches Dell OptiPlex 7040 Micro specifications
  • CL15 latency and 1.2V voltage meet JEDEC standards
  • 260-pin SODIMM form factor fits the Micro chassis exactly
  • 2Rx8 unbuffered non-ECC design ensures stable operation

仕様

BrandOWC
Part Number2S1D42R816GB
Capacity16GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7040 Micro

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 1.2V DDR4 SODIMM draw when the OptiPlex 7040 Micro runs all day?

The module operates at the standard DDR4 voltage of 1.2V, keeping power draw and heat low inside the compact Micro chassis.

What must the Dell OptiPlex 7040 Micro already have for this 260-pin SODIMM to work?

An available DDR4 SODIMM slot that accepts 260-pin unbuffered non-ECC memory at 2133MHz.

Will the CL15 2133MHz module run correctly alongside the original memory in my 7040 Micro?

Yes, it meets JEDEC PC4-17000 specs so it will match the system's native speed and timing when mixed with the factory-installed RAM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。