暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 memory module with gold edge contacts and black chips on both sides, no heat spreader

OWC

OWC 16GB DDR4 2400 CL17 ECC Registered RDIMM 2Rx8 1.2V 288-pin memory upgrade

SKU CH-SB9R-38X2W

16 GB DDR4 ECC registered RDIMM at 2400 MHz CL17 for QNAP TES-1885U, TES-3085U and TS-1685

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • 16 GB DDR4 2400 ECC registered memory protects data integrity
  • CL17 latency at 1.2 V keeps server response snappy
  • 2Rx8 288-pin RDIMM fits QNAP TES-1885U, TES-3085U, TS-1685
  • Replaces QNAP RAM-16GDR4ECT0-RD-2400 and RAM-16GDR4-RD-2400 modules
  • JEDEC and RoHS compliant for reliable long-term operation

ECC Registered DDR4 for QNAP NAS

This 16 GB DDR4 module runs at 2400 MT/s with CL17 latency and operates at 1.2 V. It uses a 288-pin RDIMM form factor with 2Rx8 organisation and includes on-board ECC. The registered design targets server and workstation platforms rather than standard desktops.

Registered buffer prevents desktop use

The single decisive specification is the registered ECC buffer. Standard desktop motherboards and consumer laptops cannot address registered DIMMs, so the module will not post in those systems. Compatibility is limited to the listed QNAP TES-1885U, TES-3085U and TS-1685 units.

Suits QNAP NAS upgrades only

Buyers expanding memory in the named QNAP models can install this module with confidence. Builders needing unbuffered DDR4 for consumer boards, or systems requiring a different speed, voltage or rank configuration, should look elsewhere.

特長

  • 16 GB DDR4 2400 ECC registered memory protects data integrity
  • CL17 latency at 1.2 V keeps server response snappy
  • 2Rx8 288-pin RDIMM fits QNAP TES-1885U, TES-3085U, TS-1685
  • Replaces QNAP RAM-16GDR4ECT0-RD-2400 and RAM-16GDR4-RD-2400 modules
  • JEDEC and RoHS compliant for reliable long-term operation

仕様

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TES-1885U
QNAP TES-3085U
QNAP TS-1685

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 2400 speed and CL17 latency run at full rate in my QNAP TS-1685?

The module is rated DDR4 2400 PC4-19200 CL17; the NAS will operate it at its supported memory speed, which may be 2400 or a lower JEDEC bin.

Does the 288-pin registered ECC design require a specific motherboard slot type?

Yes, it needs a DDR4 RDIMM slot that supports registered ECC; standard desktop UDIMM slots will not accept it.

What physical clearance does the 16GB stick need inside the chassis?

It is a standard-height 288-pin RDIMM without a heat spreader, so it fits normal DIMM sockets with no extra vertical space.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。