OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
OWC
A single 16 GB DDR4 2400 ECC unbuffered UDIMM running at CL17 and 1.2 V for desktop, workstation, server or NAS systems
This 16 GB DDR4 2400 module runs at PC4-19200 with CL17 latency and 1.2 V operation. It is an unbuffered ECC DIMM designed for workstations, servers and NAS systems such as Synology RackStation units. The single 288-pin stick provides error-correcting memory for data-critical workloads.
Systems that require registered or load-reduced DIMMs cannot use this module. Builds without ECC support in the chipset or CPU will not benefit from the error-correction feature. Non-ECC consumer desktops and laptops should look for standard unbuffered DDR4 without ECC.
Check that the platform supports 288-pin DDR4 at 2400 MT/s with ECC and unbuffered operation. The module is backward compatible with 2133 MHz buses. Confirm the number of available slots and the maximum capacity per slot before ordering.
| Brand | OWC |
|---|---|
| Part Number | 2E4D42R816GB |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Yes, the module is listed as compatible with the RS2418+ and other RackStation models including RS1619xs+, RS2818RP+ and RS3617xs+.
No heat spreader is included; the module runs at standard 1.2 V and is designed for typical workstation, server and NAS airflow.
Yes, the module is backward compatible with 2133 MHz systems and will run at the lower speed when mixed.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?