暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, low-profile DDR4 ECC UDIMM, 288-pin connector

OWC

OWC 16GB DDR4 2666 CL19 2Rx8 VLP ECC UDIMM 2E6V42R816GB

SKU CH-2JVW-4WR4S

A 16 GB DDR4 2666 ECC VLP UDIMM built for Supermicro MicroBlade 6119M-C2 and 6219G-T servers

  • Capacity16GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 16 GB DDR4 2666 CL19 boosts multitasking speed
  • ECC protection prevents data corruption in critical workloads
  • Very low profile 288-pin fits dense Supermicro MicroBlade 6119M-C2 and 6219G-T
  • JEDEC 1.2 V standard ensures broad platform compatibility
  • 2Rx8 rank organisation maximises memory density per slot

16GB DDR4 ECC VLP UDIMM for Supermicro MicroBlade

This 16GB DDR4 2666 CL19 module is built for the Supermicro MicroBlade 6119M-C2 and 6219G-T. It uses 2Rx8 unbuffered ECC chips on a 288-pin VLP PCB at 1.2V. The part number is 2E6V42R816GB. It targets administrators who need JEDEC-compliant, warranty-safe capacity increases for those specific blade servers.

Fits a 288-pin DDR4 slot on the listed MicroBlade

The very low profile height clears tight blade enclosures without blocking airflow. ECC protection guards data integrity in multi-node deployments. Unbuffered design keeps latency low for the supported platforms. One module adds 16GB per slot, letting you scale memory independently of CPU or storage changes.

Replaces lower-capacity DDR4 ECC VLP UDIMMs

The upgrade is worthwhile when workloads exceed the current memory ceiling and cause swapping or throttling. It does not suit systems that require registered DIMMs, non-ECC modules, or a different pin count. Buyers needing larger single-module densities or faster speeds must verify platform support before purchasing.

特長

  • 16 GB DDR4 2666 CL19 boosts multitasking speed
  • ECC protection prevents data corruption in critical workloads
  • Very low profile 288-pin fits dense Supermicro MicroBlade 6119M-C2 and 6219G-T
  • JEDEC 1.2 V standard ensures broad platform compatibility
  • 2Rx8 rank organisation maximises memory density per slot

仕様

BrandOWC
Part Number2E6V42R816GB
Capacity16GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro MicroBlade 6119M-C2
Supermicro MicroBlade 6219G-T

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the VLP height fit inside my Supermicro MicroBlade 6119M-C2?

Yes, the VLP form factor is built for the tight clearance of the Supermicro MicroBlade 6119M-C2 and 6219G-T chassis.

Does the module run hot or draw extra power in a fully populated blade?

At 1.2 V and without a heat spreader, it stays within standard DDR4 thermal limits during continuous operation.

Must the blade already have matching DDR4 ECC UDIMMs for this upgrade to work?

For best stability, populate all slots with identical 16 GB DDR4 2666 CL19 2Rx8 ECC unbuffered modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。