暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM module with black memory chips and gold edge connectors

OWC

OWC 16GB DDR4 3200 CL22 260-pin SODIMM memory upgrade for Dell OptiPlex 7010 7080 7090 7400

SKU CH-SBFT-4QNS2

16 GB DDR4 3200 SODIMM upgrades compatible Dell OptiPlex 7010 7080 7090 7400 systems

  • Capacity16GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • 16 GB DDR4 3200 MHz boosts multitasking speed
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM fits Dell OptiPlex 7010 7080 7090 7400
  • JEDEC and ROHS compliant for warranty-safe upgrade
  • 2Rx8 unbuffered design tested to exceed OEM specs

16GB DDR4 upgrade for Dell OptiPlex Micro and AIO

This 16GB DDR4 3200 CL22 SODIMM is built for Dell OptiPlex 7010 Micro, 7080 Micro, 7090 Micro, 7090 Ultra and 7400 AIO systems. It targets owners of these compact desktops who need more memory for multitasking and larger workloads. The module follows JEDEC PC4-25600 specifications and runs at 1.2V. It is not suited for full-size tower chassis that require standard DIMMs.

JEDEC standard voltage keeps thermals and power low

Operating at the standard 1.2V DDR4 voltage, the module draws minimal power inside the tight enclosures of Micro and AIO designs. No heat spreader is fitted, relying on the system's existing airflow. The non-ECC, unbuffered 2Rx8 organisation runs at CL22 latency without adding audible fan load. It does not address cooling for overclocked or high-voltage memory profiles.

260-pin SODIMM slot required for installation

The upgrade plugs directly into a 260-pin DDR4 SODIMM slot on the supported OptiPlex boards. No extra cables, brackets or power connectors are needed. Mixing capacities or speeds is not recommended; matching modules ensure stable dual-channel operation. Builders using full-size DIMM motherboards or proprietary soldered-memory layouts cannot use this module.

特長

  • 16 GB DDR4 3200 MHz boosts multitasking speed
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM fits Dell OptiPlex 7010 7080 7090 7400
  • JEDEC and ROHS compliant for warranty-safe upgrade
  • 2Rx8 unbuffered design tested to exceed OEM specs

仕様

BrandOWC
Part Number3S2D42R816GB
Capacity16GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7010 Micro
Dell OptiPlex 7080 Micro
Dell OptiPlex 7090 Micro
Dell OptiPlex 7090 Ultra
Dell OptiPlex 7400 AIO

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 260-pin DDR4 SODIMM in a Dell OptiPlex 7010 Micro, and what step is often missed?

Power off and unplug the system, open the chassis, align the notch on the 260-pin DDR4 SODIMM with the slot key, press firmly until the side clips click, then reseat if the system does not POST on first boot.

What maintenance or replacement will the 16GB DDR4 3200 CL22 module need over time?

No scheduled maintenance is required; keep the interior dust-free and ensure airflow stays clear so the 1.2V modules run within spec for their service life.

What limit appears first when the 2Rx8 DDR4 3200 memory runs under sustained load?

The CAS latency of CL22 at 3200 MT/s sets the timing boundary, and the 1.2V operating voltage caps headroom before thermal throttling becomes a factor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。