暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold contacts and black memory chips

OWC

OWC 1R3D32R408GB 8GB DDR3 1333 ECC Registered RDIMM

SKU CH-Y9M7-PWJC5

8GB DDR3 1333 ECC registered RDIMM for Supermicro SuperWorkstation 7036A and 7046A series

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in servers
  • 8 GB DDR3 1333 CL9 module boosts workstation capacity
  • 240-pin 1.5 V RDIMM fits Supermicro 7036A and 7046A
  • Replaces six Supermicro part numbers for easy ordering
  • JEDEC and RoHS compliant for reliable operation

Purpose-Built Server Memory

This 8GB DDR3 ECC Registered RDIMM is designed for Supermicro SuperWorkstation 7036A and 7046A series systems. It provides error-correcting, registered memory required for stable workstation and server operation. Standard desktop computers cannot use this module type.

Registered DIMM Build

The module uses a 240-pin DDR3 form factor with a 2Rx4 rank configuration and operates at 1.5V. Registered buffering reduces electrical load on the memory controller, allowing larger memory populations in compatible Supermicro platforms. No heat spreader is fitted.

DDR3 Platform Limits

DDR3 1333 speed and CL9 latency define the performance ceiling for this memory generation. Registered ECC modules cannot be mixed with unbuffered memory in the same system. Buyers needing higher bandwidth or newer memory standards must select a platform that supports later DDR generations.

特長

  • ECC registered design protects data integrity in servers
  • 8 GB DDR3 1333 CL9 module boosts workstation capacity
  • 240-pin 1.5 V RDIMM fits Supermicro 7036A and 7046A
  • Replaces six Supermicro part numbers for easy ordering
  • JEDEC and RoHS compliant for reliable operation

仕様

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 7036A Series
Supermicro SuperWorkstation 7046A Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR3 1333 (PC3-10600) interface actually run at in this Supermicro workstation?

The module operates at DDR3 1333 with PC3-10600 bandwidth and CL9 latency, matching the Supermicro SuperWorkstation 7036A and 7046A Series memory controller specification.

Will the 240-pin 1.5V ECC Registered RDIMM fit the DIMM slots on a Supermicro SuperWorkstation 7036A or 7046A?

Yes, the 240-pin DDR3 ECC Registered DIMM at 1.5V is the exact form factor and voltage required by the Supermicro SuperWorkstation 7036A and 7046A Series motherboards.

How do I install this 2Rx4 registered module, and what is the common mistake to avoid?

Power down the workstation, open the chassis, align the notch on the 240-pin DIMM with the slot key, press firmly until both retention clips lock, then verify the system recognises the full 8GB; the frequent error is mixing this registered ECC module with unbuffered memory, which prevents the system from booting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。