暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connector and black memory chips

OWC

OWC 1S6D32R804GB 4GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM for HP Omni 120 Series

SKU CH-RNSG-2TPHA

A 4GB DDR3 1600 CL11 SODIMM upgrade for HP Omni 120 series all-in-ones

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boosts responsiveness with a 4GB DDR3 1600 CL11 module
  • JEDEC-standard and RoHS compliant for a warranty-safe upgrade
  • 2Rx8 dual-rank layout optimises bandwidth on compatible HP Omni 120 systems
  • Unbuffered 1.5V non-ECC SODIMM installs easily in 204-pin slots
  • Tested to meet or exceed OEM specifications for reliable operation

Compatible upgrade for HP Omni 120

This 4GB DDR3 SODIMM is built specifically for HP Omni 120 Series systems using DDR3 memory. The module follows JEDEC standard timings and voltage for a warranty-safe installation. It targets owners who need a straightforward capacity increase without compatibility guesswork. Builders working on other platforms or requiring ECC support should look elsewhere.

Thermals noise and power

Operating at 1.5V with unbuffered, non-ECC circuitry, the module draws minimal power and generates little heat during normal workloads. No heat spreader is fitted, relying on the system’s existing airflow for cooling. Silent operation is assured because there are no moving parts. The CL11 latency at 1600MHz keeps electrical activity low and steady.

What the bundle changes

The package contains only the single memory module; no tools, cables or software discs are included. OWC’s limited lifetime warranty and free technical support cover the part after installation. A basic installation video is available online for first-time upgraders. No bundled utilities or drivers alter system behaviour beyond the added capacity.

特長

  • Boosts responsiveness with a 4GB DDR3 1600 CL11 module
  • JEDEC-standard and RoHS compliant for a warranty-safe upgrade
  • 2Rx8 dual-rank layout optimises bandwidth on compatible HP Omni 120 systems
  • Unbuffered 1.5V non-ECC SODIMM installs easily in 204-pin slots
  • Tested to meet or exceed OEM specifications for reliable operation

仕様

BrandOWC
Part Number1S6D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Omni 120 Series using DDR3 Memory

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 204-pin SODIMM into the HP Omni 120 and which step is often missed?

Power off the system, unplug it, and open the memory door; insert the module at an angle until the gold contacts are fully hidden, then press down firmly until both side clips click — the click is the step most people skip.

What maintenance or replacement will this 4GB DDR3 1600 module need over its lifetime?

No scheduled maintenance is required; keep the interior dust-free and the module will run for the life of the system unless a fault develops, in which case the limited lifetime warranty covers replacement.

What limit appears first when the CL11 1.5V memory runs under sustained load?

The DDR3 1600 CL11 timing and 1.5V JEDEC voltage set the bandwidth and thermal ceiling; the system will throttle or hit the memory-controller limit before the module itself overheats.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。