暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 UDIMM module with gold edge contacts and black memory chips, no heat spreader

OWC

OWC 1U3D31R802GB 2GB DDR3 1333 PC3-10600 CL9 240-pin UDIMM memory upgrade

SKU CH-MFSP-3HMW1

A 2 GB DDR3 1333 MHz UDIMM upgrade for HP 6000 Pro, 6005 Pro and 6200 Pro desktops

  • Capacity2GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Boosts responsiveness with 2GB DDR3 1333MHz CL9 module
  • Fits HP 6000 Pro 6005 Pro 6200 Pro desktops
  • JEDEC standard 1.5V unbuffered non-ECC design
  • Simple DIY upgrade installs in minutes
  • Lifetime warranty with free tech support included

2GB DDR3 UDIMM for HP Pro desktops

This OWC module adds two gigabytes of DDR3 1333 memory to compatible HP Pro workstations. It is built as a single 240-pin unbuffered non-ECC DIMM rated at PC3-10600 CL9 and 1.5 volts. The part targets owners of HP 6000 Pro, 6005 Pro and 6200 Pro small-form-factor or tower systems who need a straightforward capacity increase.

Verify DDR3 slots and maximum supported memory

Before ordering, confirm that your HP Pro system uses DDR3 UDIMM slots and has a free 240-pin socket. Check the system documentation or BIOS for the maximum total memory and the largest module size each slot accepts. Ensure the platform does not require ECC or registered memory, because this module is neither.

JEDEC and RoHS compliance with lifetime warranty

The memory meets JEDEC standard specifications and RoHS requirements, making it a warranty-safe upgrade for the listed HP models. OWC backs the module with a limited lifetime warranty and free technical support. No heat spreader is included, so the DIMM relies on standard case airflow for cooling.

特長

  • Boosts responsiveness with 2GB DDR3 1333MHz CL9 module
  • Fits HP 6000 Pro 6005 Pro 6200 Pro desktops
  • JEDEC standard 1.5V unbuffered non-ECC design
  • Simple DIY upgrade installs in minutes
  • Lifetime warranty with free tech support included

仕様

BrandOWC
Part Number1U3D31R802GB
Capacity2GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP 6000 Pro
HP 6005 Pro SFF
HP 6005 Pro Tower
HP 6200 Pro SFF
HP 6200 Pro Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the box and is anything else needed to install this module?

The box contains one 2GB DDR3 1333 PC3-10600 CL9 240-pin UDIMM. No extra parts are required; it fits directly into a compatible HP desktop DIMM slot.

Which capacity or version should I choose for an HP 6005 Pro SFF?

This single 2GB module matches the DDR3 1333 PC3-10600 CL9 1.5V specification for the 6005 Pro SFF. Add a second identical module if the board has a free slot and you want 4GB total.

What does the 1333MHz rating mean once the RAM is running in my HP 6200 Pro Tower?

The memory will operate at 1333MHz with CL9 latency at 1.5V, delivering the standard DDR3 1333 bandwidth the 6200 Pro Tower expects for everyday multitasking.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。