暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

OWC

OWC 2U1D41R804GB 4GB DDR4 2133 CL15 1.2V 288pin UDIMM memory upgrade

SKU CH-CCAJ-420WS

A 4GB DDR4 2133MHz CL15 UDIMM module built for HP Envy Phoenix 860-001no 860-001ns 860-002la 860-002nc 860-002nf desktops

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with 4GB DDR4 2133MHz CL15 memory
  • Fits HP Envy Phoenix 860-001no, 860-001ns, 860-002la, 860-002nc, 860-002nf
  • JEDEC standard 1.2V unbuffered UDIMM ensures stable operation
  • Easy DIY upgrade installs in standard 288-pin desktop slots
  • Backed by OWC limited lifetime warranty and free tech support

4GB DDR4 2133MHz upgrade for HP ENVY Phoenix

This 4GB DDR4 module runs at 2133MHz with CL15 latency and 1.2V operation. It is built specifically for HP ENVY Phoenix 860-001no, 860-001ns, 860-002la, 860-002nc and 860-002nf desktops. The non-ECC unbuffered design matches the original system requirements. Buyers who need ECC error correction or higher capacity sticks cannot use this module.

288-pin UDIMM form factor with no heat spreader

The standard 288-pin UDIMM layout fits directly into the desktop DIMM slots without adapters. Operating at the JEDEC standard 1.2V means no manual voltage adjustment is required in the BIOS. The absence of a heat spreader keeps the module height low for tight chassis clearances. Systems that require registered or load-reduced DIMMs are not compatible with this unbuffered stick.

JEDEC and RoHS compliance with lifetime warranty

Every module is tested to meet or exceed OEM specifications for a warranty-safe upgrade. The package includes the single 4GB DIMM only; no tools, cables or software discs are supplied. OWC provides a limited lifetime warranty with free technical support and an advanced replacement programme. Users who expect bundled installation software or diagnostic utilities will not find them here.

特長

  • Boosts multitasking with 4GB DDR4 2133MHz CL15 memory
  • Fits HP Envy Phoenix 860-001no, 860-001ns, 860-002la, 860-002nc, 860-002nf
  • JEDEC standard 1.2V unbuffered UDIMM ensures stable operation
  • Easy DIY upgrade installs in standard 288-pin desktop slots
  • Backed by OWC limited lifetime warranty and free tech support

仕様

BrandOWC
Part Number2U1D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-001no
HP ENVY Phoenix 860-001ns
HP ENVY Phoenix 860-002la
HP ENVY Phoenix 860-002nc
HP ENVY Phoenix 860-002nf

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR4 2133 PC4-17000 interface cap at in practice?

The module runs at DDR4 2133 (PC4-17000) with CL15 latency at 1.2 V, so the data rate is limited to 2133 MT/s by the JEDEC DDR4 standard.

What physical slot and clearance does this 288-pin UDIMM need to fit?

It requires a standard 288-pin DDR4 UDIMM slot; the module has no heat spreader, so it fits under low-profile CPU coolers and in tight chassis.

How is the RAM installed and which step do people often miss?

Power off and unplug the HP ENVY Phoenix, open the case, align the notch on the 288-pin DIMM with the slot key, press firmly until both retention clips click, then power on and verify 4 GB appears in BIOS.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。