暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green 240-pin DDR3L RDIMM modules with gold contacts and black chips

OWC

OWC 32GB (2x16GB) DDR3L 1600 CL11 ECC Registered RDIMM memory upgrade Supermicro X9DAL X9DAX X9DB3 X9DBi X9DBL

SKU CH-CXQQ-3JKZF

32 GB kit of two 16 GB DDR3L 1600 CL11 ECC registered RDIMMs at 1.35 V for Supermicro X9DAL, X9DAX, X9DB3, X9DBi and X9DBL motherboards

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • 32 GB dual-channel kit doubles server memory capacity
  • DDR3L 1600 CL11 ECC RDIMM ensures data integrity under load
  • 35 V low-voltage DDR3L cuts power draw versus standard DDR3
  • Registered 2Rx4 modules built for Supermicro X9DAL, X9DAX, X9DB3, X9DBi, X9DBL boards
  • JEDEC-compliant 240-pin DIMMs validated for workstation, server and NAS use

Server-grade DDR3L kit for Supermicro X9 platforms

This 32 GB kit contains two 16 GB DDR3L 1600 CL11 registered ECC modules built for Supermicro X9DAL, X9DAX, X9DB3, X9DBi and X9DBL motherboards. The 240-pin RDIMMs run at 1.35 V and use a 2Rx4 organisation. They are designed for workstation, server and NAS workloads and will not operate in standard desktop boards.

Steady throughput with registered ECC reliability

Registered buffering and ECC correction keep data integrity intact during continuous multi-threaded tasks such as virtualisation, database serving or long render jobs. The CL11 latency and 1600 MT/s transfer rate deliver predictable bandwidth without the timing variations seen in unbuffered consumer memory under sustained load.

Verify registered ECC support

Confirm your X9-series board accepts registered ECC RDIMMs and check the maximum supported capacity per channel before ordering. This kit cannot be mixed with unbuffered modules and requires a platform that explicitly lists DDR3L registered ECC compatibility.

特長

  • 32 GB dual-channel kit doubles server memory capacity
  • DDR3L 1600 CL11 ECC RDIMM ensures data integrity under load
  • 35 V low-voltage DDR3L cuts power draw versus standard DDR3
  • Registered 2Rx4 modules built for Supermicro X9DAL, X9DAX, X9DB3, X9DBi, X9DBL boards
  • JEDEC-compliant 240-pin DIMMs validated for workstation, server and NAS use

仕様

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DAL Series
Supermicro Motherboard X9DAX Series
Supermicro Motherboard X9DB3 Series
Supermicro Motherboard X9DBi Series
Supermicro Motherboard X9DBL Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 1.35V DDR3L 1600 kit run cooler than standard 1.5V DDR3 when the server operates 24/7?

The modules operate at 1.35V, which is the lower DDR3L voltage, so they draw less power and generate less heat than 1.5V DDR3 under continuous load.

Must the Supermicro X9 motherboard already support registered ECC RDIMMs and 2Rx4 density for this 32GB kit to function?

Yes, the board must accept 240-pin DDR3L ECC registered RDIMMs with 2Rx4 organisation; standard desktop boards that only take unbuffered non-ECC DIMMs will not work.

Can I add these two 16GB RDIMMs alongside existing 8GB unbuffered ECC modules in the same X9DAX system?

No, registered and unbuffered ECC memory cannot be mixed; all slots must use registered RDIMMs for the system to boot and run stably.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。