暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3L 240-pin RDIMM sticks in anti-static tray

OWC

OWC 32GB (2x16GB) DDR3L 1600 ECC Registered RDIMM 240-pin 1.35V CL11 2Rx4 memory upgrade

SKU CH-38MJ-JCBY8

32 GB dual-channel DDR3L 1600 ECC registered RDIMM kit for HP ProLiant SL2500, SL250s Gen8, SL270s Gen8, SL4545 G7 and WS460c Gen8 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design prevents data corruption in servers
  • 32 GB kit (2 × 16 GB) doubles capacity for virtualisation
  • DDR3L 1600 MHz CL11 at 1.35 V cuts power draw
  • Validated for HP ProLiant SL2500, SL250s Gen8, SL270s Gen8, SL4545 G7, WS460c Gen8
  • Replaces HP part numbers 684316181, 688963001, 713756081, 713985B21, 715284001

Server-grade DDR3L ECC RDIMM kit

This 32 GB kit contains two 16 GB DDR3L 1600 registered DIMMs built for HP ProLiant SL2500, SL250s Gen8, SL270s Gen8, SL4545 G7 and WS460c Gen8 servers. It is designed for workloads that require error-correcting, registered memory in a 240-pin form factor. The modules operate at 1.35 V with a CAS latency of CL11.

240-pin registered design for rack servers

Each module uses a 240-pin DDR3L interface with 2Rx4 organisation and no heat spreader, matching the mechanical and electrical layout expected by the listed ProLiant platforms. Registered buffering and ECC support are mandatory for these systems; the kit cannot be mixed with unbuffered memory and will not work in standard desktop motherboards.

DDR3L 1600 platform ceiling

The PC3L-12800 speed rating caps bandwidth at the DDR3L 1600 specification, so newer memory controllers that run faster cannot be used with these modules. Capacity is limited to the 32 GB provided by the two DIMMs, and the registered protocol prevents installation in consumer platforms that only accept unbuffered memory.

特長

  • ECC registered design prevents data corruption in servers
  • 32 GB kit (2 × 16 GB) doubles capacity for virtualisation
  • DDR3L 1600 MHz CL11 at 1.35 V cuts power draw
  • Validated for HP ProLiant SL2500, SL250s Gen8, SL270s Gen8, SL4545 G7, WS460c Gen8
  • Replaces HP part numbers 684316181, 688963001, 713756081, 713985B21, 715284001

仕様

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant SL2500
HP ProLiant SL250s Gen8
HP ProLiant SL270s Gen8
HP ProLiant SL4545 G7
HP ProLiant WS460c Gen8

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What bandwidth does the DDR3L 1600 PC3L-12800 interface provide?

The DDR3L 1600 PC3L-12800 standard is rated for 12800 MB/s peak transfer rate per module.

Will these 240-pin RDIMMs fit in an HP ProLiant SL250s Gen8?

Yes, the 240-pin form factor matches the memory slots in the HP ProLiant SL250s Gen8 and the other listed ProLiant models.

What is the correct way to install the two 16 GB modules, and what mistake should I avoid?

Install one module per channel in matching slots; do not mix these registered DIMMs with unbuffered memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。