暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 ECC registered RDIMM sticks, 288-pin, no heat spreaders

OWC

OWC 32GB (2x16GB) DDR4 2933MHz CL21 ECC Registered RDIMM 1.2V 288-pin Server RAM

SKU CH-D9V0-YFM99

32GB dual-channel DDR4-2933 ECC registered RDIMM kit (2×16GB, CL21, 1.2V) for servers, workstations and NAS

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB (2 x 16GB)

他に 4点の構成を表示

Rank 2Rx4

  • ECC registered design protects data integrity in servers
  • 32 GB dual-channel kit expands memory capacity
  • 2933 MHz DDR4 speed with CL21 latency
  • 2 V operation reduces power draw
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Server memory kit

This 32GB kit contains two 16GB DDR4 2933MHz modules built to PC4-23400 CL21 specifications. They are ECC registered RDIMMs intended for server, workstation and NAS platforms that require registered memory. The kit is not compatible with standard desktop computers or unbuffered memory configurations.

Low voltage operation

Each module runs at 1.2V and conforms to JEDEC standard specifications for DDR4 registered DIMMs. The registered buffer reduces electrical load on the memory controller, supporting stable operation in multi-module server environments. No heat spreader is fitted on these modules.

Backward speed support

The memory is also compatible with 2133MHz, 2400MHz and 2666MHz systems, allowing deployment in older platforms without replacing the entire memory population. The dual-channel kit simplifies matched-pair installation for supported server and workstation boards.

特長

  • ECC registered design protects data integrity in servers
  • 32 GB dual-channel kit expands memory capacity
  • 2933 MHz DDR4 speed with CL21 latency
  • 2 V operation reduces power draw
  • Backward compatible with 2133, 2400 and 2666 MHz systems

仕様

BrandOWC
Part Number2R9D42R4032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 288-pin DDR4 ECC RDIMM modules and what step is often missed?

Align the notch on each 16 GB module with the slot key, press firmly until the retention clips click, then verify in BIOS that both channels show 2933 MHz CL21 at 1.2 V.

What maintenance or replacement will the 2Rx4 registered DIMMs need over time?

No routine maintenance is required; if a module fails the limited lifetime warranty covers replacement with an identical 16 GB 2Rx4 part.

What limit appears first when the dual-channel kit runs sustained workloads?

The CL21 latency at 2933 MHz and 1.2 V sets the throughput ceiling before thermal throttling becomes a factor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。