暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR3 ECC RDIMM modules, 240-pin, no heat spreaders

OWC

OWC 32GB (4x8GB) DDR3 1333 ECC RDIMM 1R3D32R4032S

SKU CH-D7ZE-0GJ30

32 GB DDR3 1333 ECC registered RDIMM kit of four 8 GB modules for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi series servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32GB quad-channel kit expands server memory capacity
  • ECC registered design detects and corrects data errors
  • DDR3 1333 CL9 timing matches Supermicro X8D series specs
  • 5V operation aligns with platform power requirements
  • 240-pin 2Rx4 modules replace six Supermicro part numbers

Server-grade DDR3 kit

This 32 GB kit contains four 8 GB DDR3 1333 registered ECC DIMMs built for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi motherboards. It is intended for workstations, servers, NAS appliances or routers that require registered memory. It will not work in standard desktop computers and cannot be mixed with unbuffered modules.

Registered ECC requirement

The single specification that decides fit is the registered ECC design: 240-pin DDR3 1333 (PC3-10600) CL9 at 1.5 V with 2Rx4 organisation. Only systems that explicitly support registered ECC DDR3 can use this kit; unbuffered or non-ECC platforms will not post with these modules installed.

Ready-to-install quad kit

The four matched modules arrive as a tested set, eliminating the need to source individual sticks and reducing the risk of timing mismatches. This simplifies a full-channel population on compatible Supermicro boards and lets administrators restore or expand server memory in a single step.

特長

  • 32GB quad-channel kit expands server memory capacity
  • ECC registered design detects and corrects data errors
  • DDR3 1333 CL9 timing matches Supermicro X8D series specs
  • 5V operation aligns with platform power requirements
  • 240-pin 2Rx4 modules replace six Supermicro part numbers

仕様

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DT6 Series
Supermicro Motherboard X8DTE Series
Supermicro Motherboard X8DTG Series
Supermicro Motherboard X8DTH Series
Supermicro Motherboard X8DTi Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 1333 MHz rating mean once the four 8 GB sticks are installed in a compatible Supermicro board?

The kit delivers DDR3-1333 CL9 bandwidth across four channels when the motherboard supports registered ECC DIMMs at that speed.

How does the PC3-10600 standard and registered ECC design limit real-world use?

Registered ECC modules only work in server or workstation boards that support registered memory; they will not function in standard desktop systems.

What physical clearance and slot layout do the 240-pin DIMMs require?

Each module uses the standard 240-pin DDR3 form factor and fits any 240-pin DDR3 slot, with no heat spreader to interfere with tight spacing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。