暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connector

OWC

OWC 32GB DDR4 2666 CL19 2Rx8 288-pin 1.2V ECC UDIMM memory upgrade

SKU CH-467H-SVWYJ

32 GB DDR4 ECC UDIMM running at 2666 MHz CL19 for QNAP NAS models TS-883XU, TS-1283XU-RP, TS-1683XU-RP, TS-2483XU-RP and TNS-h1083X

  • Capacity32GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity expands NAS memory for larger workloads
  • ECC protection detects and corrects single-bit data errors
  • DDR4 2666 CL19 speed matches QNAP system specifications
  • 2 V low voltage reduces power draw and heat
  • Compatible with QNAP TNS-h1083X TS-1283XU-RP TS-1683XU-RP TS-2483XU-RP TS-883XU

32GB DDR4 ECC UDIMM for QNAP NAS

This 32GB DDR4 2666 CL19 ECC unbuffered UDIMM is built for QNAP TNS-h1083X, TS-1283XU-RP, TS-1683XU-RP, TS-2483XU-RP and TS-883XU systems. It adds error-correcting capacity to NAS appliances that demand data integrity. The module is not suited for platforms that require registered DIMMs or non-ECC memory.

Tool-less slot installation

Installation is a straightforward DIY task: align the notch on the 288-pin edge connector and press until the latches click. The stick runs at 1.2V and carries no heat spreader, so it fits tight NAS chassis without clearance issues. Backward compatibility with 2133MHz and 2400MHz buses means it will down-clock automatically if the system demands it.

Single 32GB rank for high-density expansion

The 2Rx8 organisation delivers 32GB in one slot, leaving remaining DIMM sockets free for future growth. It comfortably handles multi-user file serving, virtualisation workloads and large-volume backup jobs that benefit from ECC protection. Capacity runs out when the NAS reaches its maximum supported memory limit or when an application requires registered modules instead of unbuffered ones.

特長

  • 32 GB capacity expands NAS memory for larger workloads
  • ECC protection detects and corrects single-bit data errors
  • DDR4 2666 CL19 speed matches QNAP system specifications
  • 2 V low voltage reduces power draw and heat
  • Compatible with QNAP TNS-h1083X TS-1283XU-RP TS-1683XU-RP TS-2483XU-RP TS-883XU

仕様

BrandOWC
Part Number2E6D42R832GB
Capacity32GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TNS-h1083X
QNAP TS-1283XU-RP
QNAP TS-1683XU-RP
QNAP TS-2483XU-RP
QNAP TS-883XU

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I verify the 32GB DDR4 2666 CL19 2Rx8 module is detected and running at 2666MHz with ECC active after installation?

Enter the QNAP BIOS or the NAS firmware dashboard; the memory page should show a single 32GB 288-pin DDR4 ECC UDIMM at 2666MHz (PC4-21300), CL19, 1.2V, 2Rx8, unbuffered, with ECC status reported as enabled.

What ships with the OWC 32GB DDR4 2666 ECC UDIMM and what, if anything, must be purchased separately?

The box contains one 32GB DDR4 2666 CL19 2Rx8 288-pin 1.2V ECC unbuffered UDIMM; no cables, brackets or additional parts are included, and nothing extra is required to install it in a compatible QNAP NAS.

Which capacity and speed version should I choose for a QNAP TS-1283XU-RP that currently runs 2133MHz modules?

Select this 32GB DDR4 2666 (PC4-21300) CL19 2Rx8 ECC UDIMM; it is backward-compatible with 2133MHz and 2400MHz operation and replaces QNAP part RAM-32GDR4ECS0-UD-2666.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。