暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3 1066 PC3-8500 CL7 2Rx8 240-pin 1.5V Non-ECC UDIMM for HP 4000 Pro

SKU CH-1SN1-PYTPG

A 4GB DDR3 1066MHz CL7 UDIMM module validated for the HP 4000 Pro desktop

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • Boosts HP 4000 Pro responsiveness with 4GB DDR3 1066MHz CL7 module
  • Meets JEDEC and RoHS standards for warranty-safe upgrade
  • Simple DIY installation upgrades desktop or workstation in minutes
  • Unbuffered non-ECC 2Rx8 design ensures broad system compatibility
  • Tested to exceed OEM specs for reliable long-term operation

OWC 4GB DDR3 for HP 4000 Pro

This single 4GB DDR3 1066 PC3-8500 CL7 module targets owners of the HP 4000 Pro desktop who need a straightforward memory increase. The 240-pin UDIMM runs at 1.5V and uses a 2Rx8 unbuffered non-ECC design. It is built to JEDEC and ROHS standards for a warranty-safe upgrade.

No extra accessories or software included

The package contains only the memory stick itself; no heat spreader, tools or installation media are supplied. OWC provides a limited lifetime warranty and free technical support, but those services are separate from the physical product. The module is tested in-house to meet OEM specifications before shipping.

DDR3 1066 limits bandwidth to PC3-8500

The DDR3 1066 interface caps theoretical throughput at PC3-8500, which restricts performance in modern multi-threaded workloads. Systems requiring ECC error correction or registered buffering cannot use this stick. Builders needing higher capacities or faster speeds must select a different memory generation.

特長

  • Boosts HP 4000 Pro responsiveness with 4GB DDR3 1066MHz CL7 module
  • Meets JEDEC and RoHS standards for warranty-safe upgrade
  • Simple DIY installation upgrades desktop or workstation in minutes
  • Unbuffered non-ECC 2Rx8 design ensures broad system compatibility
  • Tested to exceed OEM specs for reliable long-term operation

仕様

BrandOWC
Part Number8U5D32R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP 4000 Pro

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 240-pin DDR3 module need replacement if I later add more than 4GB?

The 4GB 2Rx8 DIMM occupies one slot; you can add matching DDR3 1066 modules up to the HP 4000 Pro’s maximum supported capacity without removing this one.

What limit appears first during sustained heavy workloads on this PC3-8500 CL7 stick?

The 1066 MHz data rate and CL7 latency set the throughput ceiling; the memory controller will hit that bandwidth wall before voltage or thermal limits become a factor.

How much heat or noise does the 1.5 V unbuffered DIMM produce running all day?

With no heat spreader and standard 1.5 V JEDEC operation, the module adds minimal heat and zero audible noise; system fans handle any extra warmth.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。