暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 4GB DDR4 2133MHz CL15 1.2V 260pin SODIMM HP Envy 27-b100nd memory upgrade

SKU CH-D6H4-NP0CD

4GB DDR4 2133MHz CL15 1.2V SODIMM upgrades HP Envy 27 all-in-one models

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR4 2133MHz module
  • Low 1.2V voltage reduces power draw and heat
  • CL15 latency supports snappy multitasking
  • 260-pin SODIMM fits HP Envy 27-b100nd and listed models
  • JEDEC compliant for warranty safe upgrade

OWC 4GB DDR4 SODIMM for HP Envy 27 All-in-One

This OWC module adds four gigabytes of DDR4 memory to compatible HP Envy 27 all-in-one models including the 27-b100nd, 27-B100NF, 27-b100ng, 27-b100nl and 27-b100no. It uses the standard 260-pin SODIMM form factor found in many laptops and compact desktops. The upgrade targets owners of those specific systems who need extra capacity for everyday multitasking.

4GB capacity at 2133MHz CL15 with 1.2V operation

The stick runs at PC4-17000 speed with a CAS latency of fifteen and operates at one point two volts. Four gigabytes provides a modest boost for light workloads such as web browsing, document editing and video playback. It will not satisfy heavier tasks like modern gaming, video editing or running multiple virtual machines where larger capacities are required.

DDR4 SODIMM standard limits

This memory follows JEDEC DDR4 specifications for 260-pin SODIMM modules at 2133MHz. The non-ECC, unbuffered, single-rank design is intended for consumer platforms that do not support error correction or registered modules. Systems requiring ECC, higher frequencies, lower latencies or greater densities than four gigabytes per slot cannot use this module.

特長

  • Boosts system responsiveness with 4GB DDR4 2133MHz module
  • Low 1.2V voltage reduces power draw and heat
  • CL15 latency supports snappy multitasking
  • 260-pin SODIMM fits HP Envy 27-b100nd and listed models
  • JEDEC compliant for warranty safe upgrade

仕様

BrandOWC
Part Number2S1D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 27-b100nd
HP ENVY 27-B100NF
HP ENVY 27-b100ng
HP ENVY 27-b100nl
HP ENVY 27-b100no

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 260-pin DDR4 2133MHz module run reliably alongside the original memory already in my HP Envy 27-b100nd?

The module follows JEDEC standard specifications at 1.2V and CL15, matching the electrical and timing requirements of the factory-installed DDR4 SODIMMs in the listed Envy models.

How can I confirm the 4GB stick is recognised at its rated 2133MHz speed after installation?

Open Task Manager’s Performance tab or run CPU-Z; both will show the new module operating at 2133MHz with CL15 timings if the system has configured it correctly.

Does the 2S1D41R804GB part arrive as a single SODIMM only, or are tools and extra cables included?

The package contains one 4GB 260-pin unbuffered non-ECC SODIMM; no screwdrivers, opening tools or additional cables are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。