暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 4GB DDR4 2133MHz CL15 1.2V 288-pin UDIMM memory upgrade

SKU CH-A2DB-67H73

4 GB DDR4 2133 MHz CL15 UDIMM module for HP Envy Phoenix 860 series desktops

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts HP Envy Phoenix performance with tested DDR4 2133MHz CL15 module
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence
  • Low 1.2V operation reduces system power draw
  • Simple DIY installation fits 288-pin UDIMM desktop slots
  • Validated for specific HP Envy Phoenix 860 models listed

HP ENVY Phoenix 860 DDR4 upgrade

This 4 GB DDR4 2133 MHz CL15 UDIMM is built for HP ENVY Phoenix 860 models 860-091na, 860-100nl, 860-100nt, 860-102ng and 860-102nl. It adds memory capacity to those desktops without requiring ECC or registered modules.

Check motherboard slots and maximum capacity

Verify that your ENVY Phoenix 860 has a free 288-pin DDR4 slot and that the system firmware supports additional 1Rx8 unbuffered modules at 1.2 V. The board must accept non-ECC PC4-17000 speed memory for the upgrade to function.

JEDEC compliance and lifetime support

The module meets JEDEC standard specifications and is RoHS compliant, making it a warranty-safe upgrade for the listed systems. OWC provides a limited lifetime warranty with free technical support and an advanced replacement programme.

特長

  • Boosts HP Envy Phoenix performance with tested DDR4 2133MHz CL15 module
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence
  • Low 1.2V operation reduces system power draw
  • Simple DIY installation fits 288-pin UDIMM desktop slots
  • Validated for specific HP Envy Phoenix 860 models listed

仕様

BrandOWC
Part Number2U1D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-091na
HP ENVY Phoenix 860-100nl
HP ENVY Phoenix 860-100nt
HP ENVY Phoenix 860-102ng
HP ENVY Phoenix 860-102nl

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the OWC 4GB DDR4 2133MHz CL15 288-pin UDIMM come as a single module or a kit, and is any tool required for installation?

The product is a single 4GB 288-pin UDIMM; no extra hardware or tools are needed beyond a screwdriver to open the HP Envy Phoenix chassis.

Should I choose the 4GB PC4-17000 CL15 1.2V module or a higher-capacity stick for my HP Envy Phoenix 860-102nl?

The 4GB module adds 4GB of DDR4 2133MHz memory; if the system has free slots and supports larger densities, a higher-capacity stick will give more total RAM.

What does the 2133MHz PC4-17000 rating mean once the module is installed in an HP Envy Phoenix 860-091na?

The module will run at 2133MHz with CL15 latency at 1.2V, delivering the standard JEDEC DDR4 2133 transfer rate for that platform.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。