暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

OWC

OWC 4GB DDR4 2133MHz CL15 1.2V 288pin Non-ECC UDIMM HP Envy Phoenix 860-140 860-152ng 860-170VR 860-180st

SKU CH-EPB9-WMJR3

A 4GB DDR4 2133MHz CL15 UDIMM validated for HP Envy Phoenix 860-140, 860-152ng, 860-170VR and 860-180st desktops

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 4GB DDR4 2133MHz CL15 boosts multitasking speed
  • 2V low voltage reduces system power draw
  • 288-pin unbuffered UDIMM fits HP Envy Phoenix 860 series
  • JEDEC compliant design ensures warranty safe upgrade
  • 100% tested modules deliver reliable long-term performance

HP Envy Phoenix Compatible DDR4 Upgrade

This OWC 4GB DDR4 module is built specifically for HP Envy Phoenix desktops including the 860-140, 860-152ng, 860-170VR and 860-180st. It adds 4GB of system memory to support everyday multitasking and application responsiveness. The part number 2U1D41R804GB identifies the exact specification for these models. Buyers needing higher capacities or different form factors should look elsewhere.

JEDEC Standard 288 Pin Unbuffered DIMM

The module follows the DDR4 2133 PC4-17000 standard with CL15 latency and operates at 1.2V. It uses a 288 pin unbuffered non ECC design with a 1Rx8 rank configuration and no heat spreader. This ensures direct compatibility with the motherboard slots in the listed Phoenix systems. Builders working on non HP platforms or requiring registered memory cannot use this module.

Limited Lifetime Warranty and Free Tech Support

OWC backs the memory with a limited lifetime warranty that includes an advanced replacement program and free technical support. The kit is ROHS compliant and tested to meet or exceed OEM specifications for a warranty safe upgrade. Installation is a straightforward DIY process supported by OWC video guides. Users seeking RGB lighting or bundled software utilities will not find them here.

特長

  • 4GB DDR4 2133MHz CL15 boosts multitasking speed
  • 2V low voltage reduces system power draw
  • 288-pin unbuffered UDIMM fits HP Envy Phoenix 860 series
  • JEDEC compliant design ensures warranty safe upgrade
  • 100% tested modules deliver reliable long-term performance

仕様

BrandOWC
Part Number2U1D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-140
HP ENVY Phoenix 860-152ng
HP ENVY Phoenix 860-170VR
HP ENVY Phoenix 860-180st

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the DDR4 2133 PC4-17000 rating limit bandwidth to 17000 MB/s in the HP Envy Phoenix 860-140?

Yes, the PC4-17000 spec caps theoretical peak transfer at 17000 MB/s; actual throughput depends on the platform's memory controller and channel configuration.

Will the 288-pin UDIMM fit the motherboard slots in the HP Envy Phoenix 860-152ng without a heat spreader?

The module uses the standard 288-pin DDR4 UDIMM form factor with no heat spreader, so it seats directly in the desktop DIMM slots of that model.

What is the correct orientation step when installing this 1Rx8 module in the HP Envy Phoenix 860-170VR?

Align the notch on the gold edge connector with the key in the slot, press down evenly until both side clips snap shut, and verify the module sits flush.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。