暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 4R8D52R464GB 64GB DDR5 4800 CL40 2Rx4 ECC Registered RDIMM memory upgrade

SKU CH-TP4M-YTC26

A 64 GB DDR5 4800 CL40 ECC registered RDIMM for Gigabyte G493 and G593 servers

  • Capacity64GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCYes

Capacity 64GB

  • 64GB single module expands server memory capacity
  • DDR5 4800 speed with CL40 latency boosts data throughput
  • ECC registered design detects and corrects memory errors
  • 1V operation reduces power draw in dense configurations
  • Validated for Gigabyte G493 and G593 server platforms

Capacity and compatibility

This 64GB DDR5 ECC registered RDIMM is built for Gigabyte G493 and G593 server platforms. It targets administrators who need to add or replace memory in those specific workstation and server chassis.

Upgrade path

It replaces lower-capacity registered ECC modules in the same slots and cannot be mixed with unbuffered or load-reduced DIMMs. The jump is worth it when the workload demands more than the current memory ceiling allows.

Installation notes

The 288-pin module seats like any standard RDIMM and runs at 1.1V without extra configuration. Errors usually come from mixing registered with unbuffered memory or populating slots the board does not support.

特長

  • 64GB single module expands server memory capacity
  • DDR5 4800 speed with CL40 latency boosts data throughput
  • ECC registered design detects and corrects memory errors
  • 1V operation reduces power draw in dense configurations
  • Validated for Gigabyte G493 and G593 server platforms

仕様

BrandOWC
Part Number4R8D52R464GB
Capacity64GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemGigabyte G493-ZB2
Gigabyte G493-ZB3
Gigabyte G593-ZD1
Gigabyte G593-ZD2
Gigabyte G593-ZX1

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 288-pin DDR5 RDIMM fit the Gigabyte G493-ZB2 server motherboard?

Yes, the module is a 288-pin DDR5 ECC Registered DIMM validated for Gigabyte G493-ZB2, G493-ZB3, G593-ZD1, G593-ZD2 and G593-ZX1 systems.

What is the correct installation sequence for this 2Rx4 registered module?

Power down, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then power on and verify 4800 MT/s operation in BIOS.

When should the 64 GB ECC RDIMM be replaced?

Replace if the system logs uncorrectable ECC errors, fails memory diagnostics, or no longer posts at the rated 4800 MT/s CL40 1.1 V settings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。