暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 512GB (2x256GB) DDR4 3200 CL22 ECC Reg RDIMM Kit

SKU CH-FKNT-02F2V

A 512 GB DDR4 ECC registered RDIMM kit for Supermicro servers, running at 3200 MT/s with CL22 latency

Capacity 512GB (2 x 256GB)

  • ECC registered design protects data integrity in servers
  • 512 GB kit with two 256 GB modules expands capacity
  • DDR4 3200 CL22 speed matches system requirements
  • 288-pin 1.2 V RDIMM form factor fits Supermicro boards
  • JEDEC and RoHS compliance ensures reliable operation

512GB DDR4 ECC Registered Kit

This 512GB kit contains two 256GB DDR4 3200 CL22 ECC registered RDIMMs built for Supermicro server and workstation boards. It targets administrators upgrading H12DSG-O-CPU, H12DST-B, H12DSU-iN, H11DSI-NT or H11DST-B platforms. The modules will not work in standard desktop computers and must not be mixed with unbuffered or load-reduced memory.

288-Pin 1.2V Octal-Rank Build

Each module uses an 8Rx4 octal-rank layout on a 288-pin RDIMM form factor running at 1.2V. The registered buffer reduces electrical load on the memory controller, allowing high-density population in qualified Supermicro systems. JEDEC and RoHS compliance confirms the modules meet industry electrical and environmental standards for server deployment.

Matched Pair for Multi-Channel Operation

The kit supplies two capacity-matched DIMMs tested together to support multi-channel architectures on the listed motherboards. OWC validates every module in-house and backs the kit with a limited lifetime warranty and free technical support. The advanced replacement program ships a replacement before the original unit is returned, minimising downtime for critical infrastructure.

特長

  • ECC registered design protects data integrity in servers
  • 512 GB kit with two 256 GB modules expands capacity
  • DDR4 3200 CL22 speed matches system requirements
  • 288-pin 1.2 V RDIMM form factor fits Supermicro boards
  • JEDEC and RoHS compliance ensures reliable operation

仕様

この商品の仕様はまだ公開されていません。

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the DDR4-3200 PC4-25600 rating cap the transfer speed in practice?

The kit is rated at DDR4-3200 with a PC4-25600 bandwidth specification, which defines the maximum transfer rate the modules can sustain under JEDEC standard timings.

What physical slot and pin count does this 288-pin RDIMM need on the motherboard?

Each 256 GB module uses a standard 288-pin DDR4 RDIMM form factor and requires a matching 288-pin registered DIMM socket on the Supermicro board.

How is the octal-rank ECC registered kit installed, and what step do builders often miss?

Install both 256 GB RDIMMs in the correct channel slots for the specific Supermicro model, then enable ECC and registered mode in the BIOS so the octal-rank modules initialise properly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。