暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 memory module with gold edge connector and black chips, no heat spreader

OWC

OWC 64GB DDR4 2933MHz CL21 ECC Registered RDIMM memory upgrade

SKU CH-RY46-33DBA

64GB DDR4 2933MHz ECC registered RDIMM for Dell PowerEdge R550, R640, R740, R740XD and R740XD2 servers

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 64GB

  • 64GB capacity lets you run larger workloads on supported Dell PowerEdge servers
  • ECC registered design detects and corrects data errors for server-grade reliability
  • DDR4 2933MHz CL21 at 1.2V delivers rated speed with standard voltage
  • 288-pin RDIMM form factor fits R550, R640, R740, R740XD and R740XD2 systems
  • Backward compatible with 2133MHz, 2400MHz and 2666MHz platforms for flexible deployment

Server ECC RDIMM upgrade

This 64GB DDR4 module targets Dell PowerEdge R550, R640, R740, R740XD and R740XD2 servers needing registered ECC memory. It replaces Dell part numbers AA579530, AA601615, AB003154, SNPW403YC/64G, SNPW403YC/64VXR and W403Y. The module is not compatible with standard desktop computers or unbuffered memory configurations.

64GB capacity at 2933MHz

The single DIMM delivers 64GB running at PC4-23400 with CL21 latency and 1.2V operation. It is backward compatible with 2133MHz, 2400MHz and 2666MHz bus speeds. Systems requiring more than 64GB per slot or unregistered memory cannot use this module.

288-pin registered build

The 2Rx4 registered design uses a 288-pin interface without a heat spreader. JEDEC and RoHS compliance ensure correct electrical signalling in server and workstation boards. Builders needing unbuffered DIMMs or a different pin count must choose another product.

特長

  • 64GB capacity lets you run larger workloads on supported Dell PowerEdge servers
  • ECC registered design detects and corrects data errors for server-grade reliability
  • DDR4 2933MHz CL21 at 1.2V delivers rated speed with standard voltage
  • 288-pin RDIMM form factor fits R550, R640, R740, R740XD and R740XD2 systems
  • Backward compatible with 2133MHz, 2400MHz and 2666MHz platforms for flexible deployment

仕様

BrandOWC
Part Number2R9D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge R550
Dell PowerEdge R640
Dell PowerEdge R740
Dell PowerEdge R740XD
Dell PowerEdge R740XD2

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 2933MHz module run reliably alongside my existing 2133MHz DDR4 ECC RDIMMs in a PowerEdge R740?

Yes, the module is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, so it will operate at the speed of the slowest installed DIMM.

How can I verify the 64GB ECC registered DIMM is detected and error-correcting after installation?

Check the system BIOS or iDRAC memory inventory; it should show 64GB per module, 2933MHz speed, ECC Registered status and CL21 timings.

Does the single 288-pin RDIMM ship with a heat spreader or any installation tools?

The module has no heat spreader and no tools are included; only the DIMM itself is in the box.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。