暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connectors

OWC

OWC 8GB DDR3 1333 ECC Registered RDIMM 2Rx4 1.5V 240-pin

SKU CH-8VGK-HD660

Adds 8 GB of DDR3 1333 ECC registered memory to compatible HP ProLiant blade servers

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in servers
  • 8GB DDR3 1333 CL9 module boosts capacity for HP ProLiant blades
  • 5V operation meets JEDEC standard for reliable performance
  • 240-pin RDIMM form factor fits BL460c G7, BL490c G7, BL620c Gen7, BL680c Gen7, BL685c Gen7
  • Replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA, FX622UT

ECC Registered DDR3 for ProLiant Gen7

This 8 GB DDR3 1333 module is an ECC registered RDIMM built for HP ProLiant BL460c G7, BL490c G7, BL620c Gen7, BL680c Gen7 and BL685c Gen7 servers. It runs at 1.5 V with CL9 latency and a 2Rx4 organisation on a 240-pin form factor. The part replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA and FX622UT.

Server memory only, not desktop

The module is designed for workstation and server platforms that require registered ECC memory. It will not work in standard desktop computers and cannot be mixed with unbuffered DIMMs. Buyers who need memory for a consumer motherboard or who want to combine registered and unbuffered modules should look at a different product.

2Rx4 registered organisation decides fit

The single specification that determines compatibility is the 2Rx4 registered configuration. Only systems that accept 2Rx4 ECC registered DDR3 1333 RDIMMs at 1.5 V can use this upgrade; any other rank or buffering arrangement will prevent the module from functioning.

特長

  • ECC registered design protects data integrity in servers
  • 8GB DDR3 1333 CL9 module boosts capacity for HP ProLiant blades
  • 5V operation meets JEDEC standard for reliable performance
  • 240-pin RDIMM form factor fits BL460c G7, BL490c G7, BL620c Gen7, BL680c Gen7, BL685c Gen7
  • Replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA, FX622UT

仕様

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant BL460c G7
HP ProLiant BL490c G7
HP ProLiant BL620c Gen7
HP ProLiant BL680c Gen7
HP ProLiant BL685c Gen7

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 240-pin DDR3 RDIMM fit the memory slots on my HP ProLiant BL460c G7?

Yes, the module is a 240-pin DDR3 1333 PC3-10600 CL9 1.5 V ECC registered RDIMM and the BL460c G7 is listed as a compatible system.

What is the correct way to install this registered ECC module, and what mistake should I avoid?

Power down the server, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until the retention clips lock, and do not mix this registered RDIMM with any unbuffered DIMMs.

When will this 8 GB DDR3 RDIMM need to be replaced or serviced?

The module has no moving parts or heat spreader and carries a limited lifetime warranty; replacement is only required if a memory error appears or capacity needs increase.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。