暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 240-pin 1.5V UDIMM memory upgrade for Dell OptiPlex XE2 SFF Tower

SKU CH-964B-8F0QT

8 GB DDR3 1600 CL11 UDIMM module upgrades Dell OptiPlex XE2 SFF and Tower systems

  • Capacity8GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8GB capacity lets you run more applications simultaneously
  • DDR3 1600 speed with CL11 latency delivers responsive desktop performance
  • 240-pin UDIMM form factor fits Dell OptiPlex XE2 SFF and Tower systems
  • 5V JEDEC-standard voltage ensures reliable, warranty-safe operation
  • Non-ECC unbuffered design provides straightforward plug-in installation

Dell OptiPlex XE2 memory upgrade

This 8 GB DDR3 module is built for the Dell OptiPlex XE2 SFF and Tower chassis. It targets owners of those workstations who need more RAM for everyday multitasking and legacy application support. The single DIMM installs directly into an available 240-pin slot without tools.

8 GB capacity at DDR3 1600 CL11

The stick delivers 8 GB of PC3-12800 bandwidth with CL11 latency at 1.5 V. It handles typical office workloads, web browsing and light content creation comfortably. Systems already populated to the motherboard limit or requiring ECC registered memory will not benefit from this unbuffered non-ECC design.

JEDEC compliance and lifetime warranty

JEDEC and RoHS compliance ensure the module meets OEM specifications for a warranty-safe upgrade. The limited lifetime warranty includes free technical support from the manufacturer. No heat spreader or installation software is bundled with the memory stick.

特長

  • 8GB capacity lets you run more applications simultaneously
  • DDR3 1600 speed with CL11 latency delivers responsive desktop performance
  • 240-pin UDIMM form factor fits Dell OptiPlex XE2 SFF and Tower systems
  • 5V JEDEC-standard voltage ensures reliable, warranty-safe operation
  • Non-ECC unbuffered design provides straightforward plug-in installation

仕様

BrandOWC
Part Number1U6D32R808GB
Capacity8GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex XE2 SFF
Dell OptiPlex XE2 Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 8GB DDR3 1600 CL11 module run alongside existing DIMMs in my OptiPlex XE2?

The module follows JEDEC DDR3 1600 PC3-12800 CL11 1.5V specifications. The OptiPlex XE2 SFF and Tower platforms will clock all installed DIMMs to the lowest common speed and timing, so mixed speeds operate at the slower rate.

How can I verify the 8GB DDR3 1600 CL11 module is detected correctly after installation?

Power on the OptiPlex XE2, enter the BIOS or UEFI setup and confirm the memory section shows 8GB at 1600 MHz with CL11 timings. In Windows, Task Manager’s Performance tab or the System Information tool will also report the capacity and speed.

What comes in the box with the OWC 8GB DDR3 1600 CL11 upgrade and what must I source separately?

The package contains one 8GB 240-pin DDR3 1600 PC3-12800 CL11 2Rx8 1.5V Non-ECC UDIMM module. No cables, tools or additional hardware are included; the OptiPlex XE2 chassis provides the DIMM slots and retention clips.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。