暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with black memory chips and gold edge connectors

OWC

OWC 8GB DDR4 2400MHz CL17 1.2V 288pin UDIMM for HP EliteDesk 800 G3

SKU CH-5BE5-BR0GC

8GB DDR4 2400MHz CL17 1.2V UDIMM for HP EliteDesk 800 G3 SFF and Tower

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 8GB capacity adds headroom for multitasking and larger files
  • DDR4 2400MHz CL17 speed matches HP EliteDesk 800 G3 specifications
  • 2V low-voltage operation reduces power draw and heat
  • 288-pin UDIMM form factor fits both SFF and Tower chassis
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Targeted DDR4 upgrade for HP EliteDesk 800 G3

This 8GB DDR4 module is built specifically for the HP EliteDesk 800 G3 SFF and Tower models. It delivers a straightforward capacity increase for office workstations that need more headroom for everyday multitasking. The 2400MHz speed matches the platform's native memory controller without requiring configuration changes.

JEDEC compliance and backward compatibility

The stick meets full JEDEC standard specifications and is ROHS compliant, ensuring a warranty-safe upgrade path. Rated at CL17 latency and 1.2V operation, it also runs at 2133MHz on systems that only support the lower speed. No extra software or drivers are needed; the BIOS detects the module automatically on first boot.

Unbuffered UDIMM format for simple installation

The 288-pin unbuffered DIMM fits directly into the desktop's standard memory slots without heat spreaders that could interfere with tight SFF clearances. Non-ECC, single-rank organisation keeps electrical loading light for stable operation in both small-form-factor and tower chassis. Installation is a tool-free DIY task that takes minutes.

特長

  • 8GB capacity adds headroom for multitasking and larger files
  • DDR4 2400MHz CL17 speed matches HP EliteDesk 800 G3 specifications
  • 2V low-voltage operation reduces power draw and heat
  • 288-pin UDIMM form factor fits both SFF and Tower chassis
  • JEDEC and RoHS compliant for a warranty-safe upgrade

仕様

BrandOWC
Part Number2U4D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 800 G3 SFF
HP EliteDesk 800 G3 Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin UDIMM need any maintenance or replacement during the system's life?

The module has no moving parts and no heat spreader, so it requires no scheduled maintenance; replacement is only needed if a fault develops or you later upgrade to a larger capacity kit.

What limit appears first when the 8 GB DDR4-2400 CL17 kit runs sustained workloads?

The 8 GB capacity ceiling is reached before any thermal or timing constraint, causing the OS to swap to storage once active data exceeds the installed memory.

How much heat and power does the 1.2 V DDR4 module produce during all-day operation?

At the JEDEC-standard 1.2 V the stick draws minimal power and runs cool without a spreader, adding negligible heat to the chassis during continuous use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。