暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White rectangular fan hub with magnetic base, eight ports and front RGB lighting

PANO-MOUNTS

PANO-MOUNTS PWM ARGB Fan Hub 1-to-8 Port Magnetic SATA Remote White

SKU CH-C5EN-7BJ73

A magnetic PWM and 5 V ARGB hub splits one header into eight ports, includes built-in RGB lighting and a remote, and draws stable power from a SATA connector

  • Connect eight PWM and 5 V ARGB fans from one header
  • Built-in magnet secures the hub to any steel surface
  • Front RGB strip syncs with attached ARGB fans
  • SATA power delivers stable current at full load
  • Remote control adjusts lighting modes without software

PWM ARGB Fan Hub

This hub connects up to eight PWM fans and 5V addressable ARGB devices through a single motherboard header. It is built for PC builders who want clean cable routing and centralised lighting control without adding extra controllers. The white finish suits light-themed builds.

Sustained Load Behaviour

Powered by a SATA connector, the hub delivers stable current to all eight ports even when every fan runs at maximum speed. The magnetic base keeps the unit firmly in place during long sessions, preventing vibration or accidental disconnection inside the case.

Pre-Installation Checks

Verify that your motherboard provides a 5V 3-pin ARGB header and a 4-pin PWM header for the sync and signal cables. Confirm the power supply has a free SATA power plug and that the case offers a ferrous surface or enough flat area for the magnetic mount.

特長

  • Connect eight PWM and 5 V ARGB fans from one header
  • Built-in magnet secures the hub to any steel surface
  • Front RGB strip syncs with attached ARGB fans
  • SATA power delivers stable current at full load
  • Remote control adjusts lighting modes without software

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much heat or noise does the magnetic hub add when it runs all day?

The hub itself has no moving parts and draws power from a SATA cable, so it adds no audible noise and negligible heat inside the case.

What must I already have in my build for the hub to function?

You need a motherboard with one 4-pin PWM header and one 5 V 3-pin ARGB header, plus a spare SATA power connector from the PSU.

Can I mix older 3-pin DC fans with the 4-pin PWM ports on this hub?

The eight ports are 4-pin PWM only; 3-pin DC fans will plug in but will run at full speed without PWM control.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。