暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Plextor

Plextor FF3D516G6000HC38ADC01 2.5-Inch IDE DVD Burner

SKU CH-9GVY-WNJ5J MPN FF3D516G6000HC38ADC01

Slim 2.5-inch internal DVD burner with IDE interface, 20× write speed and 2 MB buffer

  • 20x DVD write speed for fast disc creation
  • 16x DVD read speed for quick data access
  • 2 MB buffer with underrun protection prevents coasters
  • 40x CD read speed handles legacy media
  • 5-inch IDE form factor fits slimline bays

2.5-Inch IDE DVD Burner

The Plextor PX-860A is a new internal DVD burner with a 2.5-inch form factor and an IDE / ATAPI interface. It writes DVD media at up to 20x speed and reads CDs at up to 40x. A 2 MB buffer with underrun proof technology helps prevent failed burns during system load.

Users needing IDE optical drive

This drive suits older laptops or compact desktops that still provide an IDE / ATAPI connection and a 2.5-inch bay. It is not for systems that lack an IDE header or a compatible drive bay. Buyers wanting Blu-ray read or write capability should look at a different product category.

20x DVD write speed

The maximum DVD write speed of 20x is the key figure that decides whether this burner matches the performance target for archival or media creation tasks. Read speeds reach 16x for DVD-ROM and 40x for CD-ROM. Access times are rated at 110 ms for CD and DVD and 250 ms for DVD-RAM.

特長

  • 20x DVD write speed for fast disc creation
  • 16x DVD read speed for quick data access
  • 2 MB buffer with underrun protection prevents coasters
  • 40x CD read speed handles legacy media
  • 5-inch IDE form factor fits slimline bays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What maximum write speed does the IDE ATAPI interface support on this drive?

The IDE ATAPI interface on this drive supports DVD writing up to 20x and CD writing up to 40x.

What are the exact height and depth dimensions for the 2.5-inch bay?

The drive is 42 mm high and 180 mm deep, matching a standard 2.5-inch internal bay.

How is the drive installed and which jumper setting is often missed?

Slide the drive into the bay, secure it with screws, connect the 40-pin IDE cable and power, then set the rear jumper to Master or Cable Select before closing the case.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。