暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

PNY Technologies, Inc.

PNY GeForce RTX 3070 8GB XLR8 Gaming Revel Epic-X RGB Triple Fan Graphics Card

SKU CH-M58G-8ERHJ

A triple-fan RTX 3070 with 8 GB GDDR6 on a 256-bit bus and PCIe 2.0 x16 fits 294 mm cases

  • InterfacePCI Express 2.0 x16
  • Chipset ManufacturerNVIDIA
  • Memory Size8GB
  • Memory Interface256-Bit
  • Memory TypeGDDR6
  • DirectXDirectX 11
  • 8 GB GDDR6 memory handles high-resolution textures
  • Triple-fan cooler keeps the RTX 3070 running cool under load
  • PCI Express 2.0 x16 interface fits most modern motherboards
  • 256-bit bus width feeds data to the GPU efficiently
  • 294 mm length suits mid-tower and larger cases

PNY GeForce RTX 3070 8GB

The PNY GeForce RTX 3070 8GB XLR8 Gaming Revel Epic-X RGB Triple Fan is a graphics card built on the NVIDIA Ampere architecture. It delivers 8GB of GDDR6 memory across a 256-Bit interface for high-resolution gaming. The card occupies three slots and measures 294 mm in length. It connects via a PCI Express 2.0 x16 interface.

Suits 1440p gamers and creators

This card suits players targeting 2560 x 1600 resolution with ray tracing and AI features enabled. The triple-fan cooler handles the thermal load of the RTX 3070 chipset during extended sessions. Users needing SLI multi-GPU scaling should look elsewhere as SLI support is absent. The single HDMI and single DVI outputs limit multi-monitor flexibility.

Fits standard ATX builds

A three-slot motherboard opening and a case clearing 294 mm are required for installation. The PCI Express 2.0 x16 slot provides the electrical link while the 256-Bit memory bus feeds the 8GB GDDR6 buffer. One HDMI and one DVI port drive displays up to 2560 x 1600. The design frees up adjacent slots only if the board spacing allows.

特長

  • 8 GB GDDR6 memory handles high-resolution textures
  • Triple-fan cooler keeps the RTX 3070 running cool under load
  • PCI Express 2.0 x16 interface fits most modern motherboards
  • 256-bit bus width feeds data to the GPU efficiently
  • 294 mm length suits mid-tower and larger cases

仕様

BrandPNY
InterfacePCI Express 2.0 x16
Chipset ManufacturerNVIDIA
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 11
HDMI1 x HDMI
DVI1 x DVI
TunerNone
Max Resolution2560 x 1600
SLI SupportNo
CoolerWith Fan
Max GPU Length294 mm
Slot Width3 Slots

この商品に関する質問

What power-supply connectors and wattage does the RTX 3070 8GB need?

The card draws power through the PCI Express 2.0 x16 slot and its own auxiliary connectors; choose a supply rated for the total system load and with the required 8-pin or 12-pin leads.

Will the 294 mm, 3-slot cooler fit next to my existing PCIe add-in cards?

The triple-fan shroud occupies three expansion slots and measures 294 mm long, so verify that your case and motherboard layout leave enough clearance for adjacent cards.

How can I confirm the GDDR6 memory is running at the correct 256-bit width after installation?

Open GPU-Z or a similar utility and check that the memory bus width reads 256-Bit and the memory type shows GDDR6.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。