暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three white 120 mm fans with infinity mirror ARGB rings and 11-blade rotors

Portholic

Portholic 120mm Infinity Mirror ARGB Case Fan White 3-Pack

SKU CH-FXTD-ZSANF

Three 120 mm fans with dual-sided infinity-mirror ARGB lighting deliver 63 CFM airflow at 1,800 RPM and 24 dBA noise, plus PWM speed control from 600 to 1,800 RPM

  • TypeCase Fan
  • ColorWhite
  • LEDARGB

Option 3 Packs

  • Vivid infinity mirror ARGB lighting on three 120 mm fans
  • 11-blade design delivers 63 CFM airflow at 1 800 RPM
  • Hydraulic bearing runs at 23.5 dBA for quiet operation
  • PWM speed control adjusts automatically from 600 to 1 800 RPM
  • RF remote lets you change colours and effects instantly

Three-Pack Infinity Mirror ARGB Fans

This 120 mm three-pack adds addressable RGB lighting and hydraulic-bearing cooling to a standard ATX chassis. The white frame and multi-sided infinity mirror create a three-dimensional glow visible from both front and rear. PWM control lets the motherboard adjust speed automatically between 600 and 1,800 RPM. Builders wanting coordinated lighting across intake and exhaust positions get a matched set in one box.

Upgrade from single-colour or non-LED fans

Replacing basic 120 mm fans with this kit raises airflow to 63 CFM while keeping noise near 24 dBA at full speed. The 11-blade design balances static pressure and volume, making the jump worthwhile when a radiator or restrictive front panel needs more push. Users staying with a single exhaust fan or a non-ARGB ecosystem will not use the lighting controller or the extra two fans.

Tool-free mounting with included hub

Four corner screws secure each fan; the supplied hub and RF remote handle power and lighting without extra software. Connect the 5 V 3-pin ARGB header to a compatible motherboard or use the remote for standalone modes. A common issue is forgetting the 12 V PWM lead, which leaves the fan running at a fixed speed instead of following the temperature curve.

特長

  • Vivid infinity mirror ARGB lighting on three 120 mm fans
  • 11-blade design delivers 63 CFM airflow at 1 800 RPM
  • Hydraulic bearing runs at 23.5 dBA for quiet operation
  • PWM speed control adjusts automatically from 600 to 1 800 RPM
  • RF remote lets you change colours and effects instantly

仕様

TypeCase Fan
ColorWhite
LEDARGB

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 120 mm frame fit my case fan slots and radiator mounts?

Yes, the 120 mm square frame matches standard case fan slots and 120 mm radiator mounts.

How do I connect the 5 V 3-pin ARGB and 4-pin PWM cables, and what mistake should I avoid?

Plug the 5 V 3-pin ARGB header into the motherboard's 5 V addressable RGB header — not the 12 V RGB header — and connect the 4-pin PWM cable to a CPU or chassis fan header for 600–1800 RPM speed control.

When will the hydraulic bearings need replacement, and what is the rated lifespan?

The hydraulic bearings are rated for 20,000 hours of continuous operation before replacement is typically needed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。