暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White POM acrylic tube reservoir 120mm matte black end caps compression ring design

PrimoChill

PrimoChill CTR Hard Mount Reservoir 120mm White POM TX Matte Black

SKU CH-B570-T1WJG

A 120 mm hard-mount reservoir with compression-ring end caps, 57 mm inner diameter, 63 mm outer diameter and 158 mm overall length for G 1/4 fittings

  • TypeReservoir
  • Compression-ring end caps seal without cutting tubing
  • 120 mm tube length fits compact builds
  • White POM end caps with matte black finish
  • Four low-profile port caps and two three-port end caps included
  • G 1/4 thread compatible with standard fittings

120 mm hard-mount reservoir

The PrimoChill CTR Hard Mount Reservoir is a 120 mm compression-tube reservoir built for custom liquid-cooling loops. Its laser-cut acrylic tube and G 1/4 threads suit modders who want a clean, rigid reservoir without cutting or tapping the tube ends.

Two multi-port end caps included

The package supplies two three-port mountable end caps plus four low-profile port caps with O-rings. These parts let builders route coolant through multiple paths and seal unused ports without extra fittings.

158 mm overall length with 38 mm end-cap allowance

The reservoir measures 158 mm long once the end caps are fitted, adding 38 mm to the nominal 120 mm tube length. Builders must verify that their case or mounting bracket can accommodate this total length.

特長

  • Compression-ring end caps seal without cutting tubing
  • 120 mm tube length fits compact builds
  • White POM end caps with matte black finish
  • Four low-profile port caps and two three-port end caps included
  • G 1/4 thread compatible with standard fittings

仕様

TypeReservoir

この商品に関する質問

What O-rings or seals will need replacing on this 120 mm CTR reservoir?

Each end cap uses a compression-ring O-ring that seals against the 57 mm inner-diameter acrylic tube; the four low-profile port caps also have O-rings. All are standard G 1/4 sizes available from any water-cooling supplier.

Will the 158 mm overall length fit in my case’s 120 mm fan mount?

The reservoir body is 120 mm, but the two end caps add 38 mm total, making the assembly 158 mm long. Measure the clear distance from the fan-mount face to the nearest obstruction before ordering.

Does the white POM material warp or leak when the loop runs hot all day?

The white POM end caps and laser-cut acrylic tube are rated for continuous liquid-cooling temperatures well above typical loop temps; the compression-ring design seals without stressing the tube, so heat-related warping or leaks are not expected.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。