暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black DDR5 modules with RGB light bars

PUSKILL

PUSKILL Vengeance 32GB DDR5 6000MHz CL30 RGB Desktop RAM

SKU CH-AS3T-F1DF8

A 32 GB DDR5 kit running at 6000 MHz with CL30 latency and RGB lighting

  • Voltage1.35V
  • Timing11-11-11-36
  • Capacity32GB
  • Buffered/RegisteredRegistered
  • Tested Frequency6000 MHz
  • LED ColorRGB
  • CL30 latency cuts CPU wait times for smoother 1% lows in games
  • 6000 MHz bandwidth speeds 4K editing, 3D rendering and heavy multitasking
  • XMP 3.0 and EXPO profiles enable rated speed with one BIOS click
  • 35 V operation keeps thermals low under sustained loads
  • 32 GB dual-channel kit (2×16 GB) fits modern Intel 12/13/14 gen and AMD Ryzen 7000/8000 platforms

Capacity and Platform Fit

The PUSKILL Vengeance kit delivers 32 GB of DDR5 memory in a 2 x 16 GB configuration. It is built for desktop builders targeting Intel LGA1700 platforms from the 600 and 700 series or AMD AM5 platforms running Ryzen 7000 and 8000 series processors. Registered buffering and a tested frequency of 6000 MHz make it suited to workloads that demand both capacity and data integrity. Buyers who need unbuffered DIMMs or higher density per module should look elsewhere.

Sustained Load Behaviour

With XMP 3.0 or EXPO enabled the modules run at 6000 MHz and tight 11-11-11-36 timings at 1.35 V. The low CL30 latency reduces CPU wait states during extended gaming sessions, 4 K video editing and 3D rendering, keeping 1 % low frame-rates steadier than looser-timed alternatives. Without the one-click profile the kit defaults to 4800 MHz, so the full sustained throughput depends on BIOS activation.

Thermals and Power

A minimalist heat spreader covers the critical components, moving heat away from the DRAM and the onboard power management IC during prolonged use. The 1.35 V operating voltage limits power draw while maintaining the 6000 MHz data rate. RGB lighting is present but adds negligible thermal load. Acoustic output remains limited to the system’s own airflow as the modules have no moving parts.

特長

  • CL30 latency cuts CPU wait times for smoother 1% lows in games
  • 6000 MHz bandwidth speeds 4K editing, 3D rendering and heavy multitasking
  • XMP 3.0 and EXPO profiles enable rated speed with one BIOS click
  • 35 V operation keeps thermals low under sustained loads
  • 32 GB dual-channel kit (2×16 GB) fits modern Intel 12/13/14 gen and AMD Ryzen 7000/8000 platforms

仕様

Voltage1.35V
Timing11-11-11-36
Capacity32GB
Buffered/RegisteredRegistered
Tested Frequency6000 MHz
LED ColorRGB
BrandPUSKILL
SeriesVengeance

この商品に関する質問

How much power does the 1.35 V kit draw when it runs at 6000 MHz all day?

The modules operate at 1.35 V and are rated for 6000 MHz with CL30-36-36-76 timings, so sustained load stays within standard DDR5 power limits for that voltage.

What motherboard features must I already have to run the kit at 6000 MHz?

You need a board that supports Intel XMP 3.0 or AMD EXPO and a CPU with a DDR5 controller — Intel LGA1700 12th/13th/14th Gen or AMD Ryzen 7000/8000 series on AM5.

Will the 6000 MHz CL30 sticks work alongside my existing 4800 MHz DDR5 modules?

Mixing speeds forces all memory to run at the lowest common frequency; the kit defaults to 4800 MHz without XMP/EXPO, so it will match older 4800 MHz modules but you lose the 6000 MHz benefit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。