暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Open-frame 100W power supply unit, bare circuit board with components exposed

Qnap

Qnap PWR-PSU-100W-DT01 100W Open Frame Power Supply for NAS

SKU CH-7F73-AV4CM MPN PWR-PSU-100W-DT01

100 W open-frame power supply keeps compatible QNAP desktop NAS units running reliably

  • TypeAccessory
  • Features100W Open Frame Power Supply
  • Delivers 100 W of reliable power to compatible NAS units
  • Open-frame design simplifies integration into desktop chassis
  • New condition ensures full factory performance from day one
  • Listed by manufacturer on 17 August 2026 for current availability
  • Purpose-built accessory matches QNAP desktop NAS power requirements

Replacement Power Supply

The Qnap PWR-PSU-100W-DT01 is a 100W open frame power supply designed as an accessory for compatible desktop NAS units. It provides a direct replacement when the original unit fails or a spare is required for maintenance.

Suitable For Direct Replacement

This unit suits administrators who need a like-for-like 100W module for a supported Qnap NAS. It is not for builders wanting higher wattage, different form factors, or power supplies for non-Qnap hardware.

Fits Inside Compatible NAS Chassis

The open frame design slots into the allocated bay of a matching desktop NAS, drawing AC input and delivering the required DC rails to the motherboard and drives. It frees the system from downtime caused by a failed internal supply.

特長

  • Delivers 100 W of reliable power to compatible NAS units
  • Open-frame design simplifies integration into desktop chassis
  • New condition ensures full factory performance from day one
  • Listed by manufacturer on 17 August 2026 for current availability
  • Purpose-built accessory matches QNAP desktop NAS power requirements

仕様

BrandQNAP
ModelPWR-PSU-100W-DT01
TypeAccessory
Features100W Open Frame Power Supply
配送重量1.36 kg
梱包サイズ254 × 203 × 127 mm

この商品に関する質問

What QNAP NAS chassis is the PWR-PSU-100W-DT01 designed to fit?

This 100 W open-frame power supply is built as a direct replacement accessory for compatible QNAP desktop NAS units; check your NAS model’s service manual to confirm it accepts the PWR-PSU-100W-DT01 form factor.

Will the PWR-PSU-100W-DT01 power an older QNAP NAS that originally shipped with a lower-wattage supply?

If the older NAS uses the same open-frame mounting pattern and connector layout, the 100 W unit can serve as a higher-capacity replacement; verify the chassis compatibility list before installing.

How can I confirm the PWR-PSU-100W-DT01 is delivering power correctly after installation?

After fitting the supply, the NAS should complete its normal boot sequence, the status LED should show a steady power state, and the system management interface should report stable voltage rails.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。