暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Qnap

Qnap TRAY-35-NK-GLD01 Gold HDD tray 3.5 2.5 backup media

SKU CH-AHT6-65TFQ MPN TRAY-35-NK-GLD01

Gold drive tray accepts 3.5" and 2.5" drives and includes mounting screws

  • FeaturesGold HDD tray with 3.5" & 2.5" HDD / SSD screws
  • Gold HDD tray simplifies drive swaps
  • Supports 3.5" and 2.5" drives with included screws
  • Single tray fits both form factors
  • New condition ensures clean, reliable installation
  • Qnap design matches compatible NAS bays

Compatible drive bays

The tray fits a single 3.5 or 2.5 inch drive and includes the correct mounting screws for each size. It is designed for Qnap NAS enclosures that accept this form factor. Builders using other chassis or proprietary sleds should verify compatibility before purchase.

Thermal and acoustic impact

The metal construction conducts heat from the installed drive into the NAS airflow path without adding moving parts. No fan or power draw is introduced, so system noise and power consumption remain unchanged.

Included hardware

Two screw sets are supplied, one for 3.5 inch drives and one for 2.5 inch drives, allowing immediate installation of either format. No software, cables or additional brackets are bundled.

特長

  • Gold HDD tray simplifies drive swaps
  • Supports 3.5" and 2.5" drives with included screws
  • Single tray fits both form factors
  • New condition ensures clean, reliable installation
  • Qnap design matches compatible NAS bays

仕様

BrandQnap
ModelTRAY-35-NK-GLD01
FeaturesGold HDD tray with 3.5" & 2.5" HDD / SSD screws
配送重量1.36 kg
梱包サイズ254 × 203 × 102 mm

この商品に関する質問

How do I install the TRAY-35-NK-GLD01 and which screws do I use for a 2.5" SSD?

Slide the drive into the tray, align the holes marked for 2.5" devices, and fasten the four smaller screws supplied in the pack; the larger screws are for 3.5" drives only.

What maintenance will this gold tray need over time?

No scheduled maintenance is required; simply check that the four mounting screws stay tight after the first few weeks of vibration and reseat the drive if the bay lever feels loose.

What is the first limit I will hit if I swap drives in this tray every day?

The plastic latch and screw threads are rated for occasional swaps; daily removal will wear the latch catch and strip the fine threads on the 2.5" screw holes first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。