暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three white 120mm case fans with infinity mirror centre and side ARGB strips

Redragon

Redragon GCF012 Reverse 120mm ARGB PWM Case Fan 3 Pack White

SKU CH-GXCS-GBE1H

Three 120 mm white ARGB PWM fans with daisy-chain wiring, 800-2000 RPM speed, 68.8 CFM airflow, 2.05 mm H₂O pressure and 29.2 dBA noise

Color White

  • Modular snap-on design simplifies multi-fan builds
  • 5V 3-pin ARGB syncs with major motherboard lighting
  • 800–2000 RPM delivers up to 68.8 CFM airflow
  • 05 mm H₂O static pressure suits radiator cooling
  • 2 dBA operation with rifle bearing and corner pads

Three-Pack 120mm ARGB Case Fans

The Redragon GCF012 Reverse 120mm ARGB PWM fans come in a white three-pack for builders wanting coordinated cooling and lighting. Daisy-chain connectors let you link multiple units without extra cables. A 5V 3-pin ARGB header syncs the infinity mirror centre and side strips with major motherboard software. The bundle suits fresh builds or upgrades that need several matching fans at once.

Thermals Noise and Power

Each fan spins from 800 to 2000 RPM under PWM control, moving up to 68.8 CFM with 2.05 mm H₂O static pressure. RIFLE BEARING technology and corner shock-absorbing pads keep operating noise down to 29.2 dBA. The 25 mm thick frame fits standard 120 mm mounting points on cases or radiators. Power draw stays modest thanks to the 4-pin PWM interface that scales voltage with speed.

Deciding Specification: Daisy-Chain ARGB

The snap-on daisy-chain design is the feature that determines fit: it removes the need for a separate fan hub or splitter cables when running three or more fans. Builders who prefer individual headers or lack a 5V ARGB motherboard connector should note the dependency on that single interface for both power and lighting control.

特長

  • Modular snap-on design simplifies multi-fan builds
  • 5V 3-pin ARGB syncs with major motherboard lighting
  • 800–2000 RPM delivers up to 68.8 CFM airflow
  • 05 mm H₂O static pressure suits radiator cooling
  • 2 dBA operation with rifle bearing and corner pads

仕様

この商品の仕様はまだ公開されていません。

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I connect the three fans together using the daisy-chain feature?

Snap each fan into the modular connectors on the side of the frame so power and the 5V 3-pin ARGB signal pass from one unit to the next; the step most builders miss is seating the clips fully until they click, otherwise the lighting chain breaks.

Which part will wear out first and need replacement?

The RIFLE BEARING inside the motor is the only moving component that degrades over time; the shock-absorbing corner pads and the infinity-mirror LEDs are static and do not require scheduled replacement.

At what noise level does the fan become audible under sustained load?

At the maximum 2000 RPM setting the fan reaches 29.2 dBA, which is the first limit you notice during extended high-airflow operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。