暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Replace Power

Replace Power 510-p131jp ATX power supply

SKU CH-6PP6-GET3D

ATX power supply with 20+4 pin, 4-pin +12V, 6-pin and three SATA connectors for HP Pavilion 510-p131jp

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight1
  • Drop-in replacement for HP Pavilion 510-p131jp
  • Standard 20+4 pin ATX connector fits motherboard
  • Dedicated +12V 4-pin connector powers CPU
  • Six-pin PCIe connector supports graphics card
  • Three SATA connectors drive storage devices

Replacement PSU for HP Pavilion 510-p131jp

This ATX power supply from Replace Power is built as a direct replacement for the HP Pavilion 510-p131jp desktop. It delivers standard ATX connectivity with a grey chassis and a single cooling fan. The unit suits owners of that specific model who need a new power source.

Steady output through standard connectors

The supply provides a 20+4 pin ATX connector, a +12V 4-pin power connector, one 6-pin power connector and three SATA connectors. This fixed cable set powers the motherboard, processor, a discrete graphics card and multiple drives simultaneously under continuous load.

Direct swap installation with fixed cables

Installation follows a direct swap of the original unit using the same mounting points and connector layout. The fixed cables cannot be removed, so builders must route unused leads carefully. The single fan handles airflow in the original chassis without extra clearance concerns.

特長

  • Drop-in replacement for HP Pavilion 510-p131jp
  • Standard 20+4 pin ATX connector fits motherboard
  • Dedicated +12V 4-pin connector powers CPU
  • Six-pin PCIe connector supports graphics card
  • Three SATA connectors drive storage devices

仕様

BrandReplace Power
ColorGrey
TypeATX
Fans1
Weight1

この商品に関する質問

How much noise or heat does the single fan produce when the Replace Power 510-p131jp ATX power supply runs continuously?

The unit uses one fan to move air through the chassis; acoustic and thermal output will depend on the load placed on the +12 V rail and the case airflow around it.

Which cables or connectors must already be present in my build for this PSU to power the motherboard and drives?

Your motherboard needs a 20+4 pin ATX socket and a +12 V 4-pin CPU connector, while each drive requires a standard SATA power plug — three are supplied on the PSU.

Will the 6-pin power connector on this PSU work with the older graphics card I plan to keep?

The 6-pin PCIe connector delivers +12 V power directly; if the legacy card requires a 6-pin input it will connect, but cards needing an 8-pin or dual 6-pin setup cannot be powered.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。