暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Grey ATX power supply unit with single fan

Replace Power

Replace Power AP-MPS3ATX30-17 300W ATX power supply

SKU CH-H8PH-Y3DJ9 MPN AP-MPS3ATX30-17

300 W ATX unit with one fan, 20+4-pin ATX, 4-pin ATX12V, two peripheral, one floppy and three SATA connectors

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 300 W steady output powers your desktop reliably
  • Direct replacement for Antec PP-303X and SP-350 units
  • High efficiency design lowers energy waste
  • Over-voltage protection guards connected components
  • 20+4-pin, 4-pin, three SATA and two peripheral connectors included

Replacement for Antec PP-303X SP-350

This 300W ATX power supply replaces the Antec PP-303X SP-350 unit. It fits standard ATX cases and delivers steady power for desktop repairs or upgrades. The grey enclosure houses a single fan for cooling.

300W continuous output

The supply provides 300 watts of continuous power. That single figure determines whether it can run your components without shutting down. Check your system draw against this rating before buying.

Three SATA and legacy connectors

The unit includes three SATA power connectors, two peripheral connectors, one floppy connector, a 20+4-pin ATX connector and a 4-pin ATX12V connector. It handles older drives and basic motherboards comfortably; it runs out when a build needs PCIe power cables or more than three SATA devices.

特長

  • 300 W steady output powers your desktop reliably
  • Direct replacement for Antec PP-303X and SP-350 units
  • High efficiency design lowers energy waste
  • Over-voltage protection guards connected components
  • 20+4-pin, 4-pin, three SATA and two peripheral connectors included

仕様

BrandReplace Power
ModelAP-MPS3ATX30-17
ColorGrey
TypeATX
Fans1
Weight0.1

この商品に関する質問

What does the 300W rating mean for a desktop build?

The 300W rating indicates the maximum continuous power this unit can deliver to components like the CPU, graphics card, and drives. It suits basic office PCs or older systems with modest power draw.

How does the ATX form factor limit compatibility?

The ATX form factor sets the physical dimensions and mounting hole pattern. It fits standard ATX cases but will not fit slimline, SFX, or proprietary chassis that require a different size.

What clearance is needed for the single fan and connector layout?

The unit uses one fan for exhaust, so the case must allow airflow at the rear. The 20+4-pin ATX, 4-pin ATX12V, two peripheral, one floppy, and three SATA connectors require enough cable routing space behind the motherboard tray.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。