EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Replace Power
A 420W ATX power supply with 20+4 pin, 12V, SATA, Molex and floppy connectors for eMachines W2925 W3115 W3118 W3050 W2260 W3080 desktops
This Replace Power RPSU-C99-66 unit delivers 420W of ATX power and is built to fit eMachines W2925 W3115 W3118 W3050 W2260 W3080 systems. It accepts 110V or 220V input via a manual switch and uses a grey chassis with a single 80mm fan. The 20+4 pin motherboard connector supports both 20-pin and 24-pin boards.
The supply provides a steady 420W output for continuous operation rather than short bursts. Its fixed cable set includes one 15-inch SATA connector, one 14-inch ATX connector, one 14-inch 12V ATX connector, two 15-inch large peripheral connectors, two 6-inch large peripheral connectors and one 6-inch small peripheral connector. All leads are ready for immediate installation.
An 80mm fan handles cooling while the unit draws either 110V or 220V from the wall depending on the switch position. The compact form factor weighs 0.1 kg and fits the original eMachines mounting points. No additional adapters are required for the listed motherboard and peripheral connections.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-66 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The 80mm fan spins continuously to move heat out of the chassis; its speed adjusts to load so noise stays proportional to demand.
A 20-pin or 24-pin ATX socket is required; the 20+4 connector on the PSU fits both.
Yes, the 15-inch SATA cable and 14-inch ATX cables are sized for those chassis layouts.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?