EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Replace Power
A 420W ATX power supply with an 80mm fan and switchable 110V or 220V input for compatible HP Media Center desktops
This 420W ATX power module from Replace Power is built as a direct replacement for several HP Media Center desktops including the m7050e, m7050y, m7060n, m7100y CTO, m7163w and m7167c. It delivers standard ATX output through a single 80mm fan and a grey chassis.
It suits owners of the listed HP Media Center models who need a like-for-like 420W unit with the original connector layout. Builders working on custom ATX chassis or systems that require PCIe power, multiple SATA drives or higher wattage should look elsewhere.
The unit fits the proprietary bays of the compatible HP models and accepts 110V or 220V input via a manual switch. Included cables provide one SATA connector, a 20+4 pin ATX connector, a 12V ATX connector, two large peripheral connectors, two short peripheral connectors and one small peripheral connector, freeing the builder from sourcing adapters.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-xa |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Yes, it ships with one 14-inch 20+4 pin ATX connector and one 14-inch 12V ATX connector for the motherboard.
The supply is built as a direct replacement for the listed HP Media Center models including the m7050e, so the mounting holes and 80mm fan align with the original chassis.
Before powering on, check the rear voltage selector; it should show 110V for North America or 220V for most other regions, matching your local mains supply.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?