暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 UDIMM module with black chips and gold contacts

RIMLANCE

RIMLANCE 16GB DDR4 2933 ECC UDIMM 1Rx8

SKU CH-EQBS-Q6XY9

16 GB DDR4 ECC UDIMM running at 2933 MHz with CL21 latency for reliable server data integrity

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protects data integrity with single-bit error correction
  • 2933 MHz DDR4 speed delivers high-throughput server performance
  • 2 V operation reduces power draw per module
  • 1Rx8 unbuffered layout fits standard UDIMM slots
  • 16 GB capacity expands memory for virtualized workloads

RIMLANCE 16GB DDR4 2933 ECC UDIMM

This RIMLANCE 16GB DDR4 2933 ECC UDIMM is a single unbuffered DIMM built for server platforms that require error-correcting memory. It operates at 2933MHz with a CL21 latency and runs at 1.2V using a 1Rx8 chip configuration. The module uses major brand chips on a standard 288-pin DDR4 form factor.

Suited for ECC UDIMM servers.

This module suits servers and workstations that accept unbuffered ECC DDR4 UDIMMs at 2933MHz. It is not compatible with systems that require registered or load-reduced DIMMs. Buyers whose platforms only support non-ECC consumer memory should select a different module. Desktop boards without ECC support in the BIOS cannot use the error-correction feature.

288-pin DDR4 UDIMM form factor decides fit

The 288-pin DDR4 UDIMM form factor is the single specification that determines whether this module fits the target system. Only platforms designed for unbuffered DDR4 ECC UDIMMs can accept this part. Registered DIMM slots and consumer non-ECC slots are physically or electrically incompatible. Verify the motherboard manual for UDIMM ECC support before purchase.

特長

  • ECC protects data integrity with single-bit error correction
  • 2933 MHz DDR4 speed delivers high-throughput server performance
  • 2 V operation reduces power draw per module
  • 1Rx8 unbuffered layout fits standard UDIMM slots
  • 16 GB capacity expands memory for virtualized workloads

仕様

BrandRIMLANCE
ModelREU23400S8C16
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset

この商品に関する質問

Does the 2933 MHz speed drop under sustained load?

The module runs at 2933 MHz with CL21 latency at 1.2 V; DDR4 JEDEC timing does not throttle under normal server workloads.

How much heat or noise does this 1.2 V DDR4 stick add to a fully populated chassis?

Unbuffered DDR4 at 1.2 V produces minimal heat and has no moving parts, so it adds no audible noise to the system.

What motherboard slot and memory controller features are required for this ECC UDIMM to function?

A 288-pin DDR4 UDIMM slot with ECC support in the CPU or chipset is required; registered or load-reduced slots will not accept this module.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。