SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00502712BTC
在庫あり
RIMLANCE
RIMLANCE REU23400D8C2K32 32GB (2x16GB) DDR4 2933 ECC UDIMM 2Rx8
A 32 GB DDR4 ECC UDIMM kit running at 2933 MHz with CL21 latency for data integrity in servers and workstations
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2933 (PC4 23400)
- CAS LatencyCL21
- ECCYes
- Buffered/RegisteredUnbuffered
- 32 GB kit (2 × 16 GB) for high-capacity server workloads
- DDR4 2933 MT/s (PC4-23400) for fast data throughput
- ECC protection corrects single-bit errors to maintain data integrity
- Unbuffered 288-pin UDIMM fits standard server and workstation boards
- 2 V operation reduces power draw under load
Kit contents
This kit provides 32 GB of DDR4 ECC UDIMM memory in a matched pair of 16 GB modules. It targets servers and workstations that require error-correcting code for data integrity without registered buffering.
Capacity and headroom
Two ranks per module at 2Rx8 organisation give 32 GB total capacity for databases, virtualization and scientific workloads. The 21-cycle CAS latency and 1.2 V operating voltage set the boundary where throughput gains diminish and stability margins narrow.
DDR4 2933 limits
The PC4-23400 rating on 288-pin DDR4 caps sustained bandwidth at the 2933 MT/s data rate. Unbuffered topology restricts maximum module count per channel compared to registered alternatives, limiting total system capacity on many platforms.
特長
- 32 GB kit (2 × 16 GB) for high-capacity server workloads
- DDR4 2933 MT/s (PC4-23400) for fast data throughput
- ECC protection corrects single-bit errors to maintain data integrity
- Unbuffered 288-pin UDIMM fits standard server and workstation boards
- 2 V operation reduces power draw under load
仕様
| Brand | RIMLANCE |
|---|---|
| Model | REU23400D8C2K32 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
この商品に関する質問
Can I add this 2933MHz CL21 ECC UDIMM kit alongside slower DDR4 ECC modules already installed?
The kit runs at 2933MHz with CL21 timing; if mixed with slower DDR4 ECC UDIMMs the system will typically downclock all modules to the lowest common speed and loosest timings.
How can I confirm the 32GB kit is running at 2933MHz with ECC active after installation?
Check the BIOS memory information or use a tool such as CPU-Z or dmidecode to verify the reported speed, CL21 timings, 1.2V voltage and ECC status for each 16GB module.
Does the 288-pin DDR4 UDIMM package include any heatsinks, cables or software, or must they be purchased separately?
The box contains only the two 16GB 2Rx8 ECC UDIMM modules; no heatsinks, cables or software are included and none are required for standard server or workstation installation.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
