暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

RIMLANCE

RIMLANCE RRD17000S8C4 4GB DDR4 2133 ECC Registered RDIMM

SKU CH-CNH0-M4YNW

4GB DDR4 2133 ECC registered RDIMM with CL15 latency for server workloads

  • Capacity4GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory headroom
  • DDR4 2133 speed supports high-throughput workloads
  • ECC registered design protects data integrity
  • 1Rx8 single-rank layout optimises signal stability
  • 2V operation reduces power draw

Server Memory for DDR4 Platforms

This 4 GB registered DIMM is built for DDR4 servers and workstations that require ECC protection. It suits administrators expanding capacity in compatible systems where data integrity matters.

Registered Design with 288-Pin Interface

The module uses a registered buffer and 288-pin DDR4 form factor to reduce electrical load on the memory controller. ECC circuitry corrects single-bit errors, while the 1Rx8 organisation fits standard server slots.

Low-Voltage Operation at 1.2 V

Running at 1.2 V and 2133 MT/s with CL15 timing, the DIMM keeps power draw modest in normal server workloads. Major-brand DRAM chips and factory testing support stable thermals and quiet operation in dense chassis.

特長

  • 4GB capacity expands server memory headroom
  • DDR4 2133 speed supports high-throughput workloads
  • ECC registered design protects data integrity
  • 1Rx8 single-rank layout optimises signal stability
  • 2V operation reduces power draw

仕様

BrandRIMLANCE
ModelRRD17000S8C4
Capacity4GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

この商品に関する質問

What is the DDR4 2133 PC4-17000 interface and what speed does it run at?

The module uses a DDR4 2133 interface rated at PC4-17000, so it transfers data at 2133 MT/s in compatible servers.

What physical slot and pin count does this 288-pin RDIMM require?

It fits a standard 288-pin DDR4 DIMM socket; the registered design and 1Rx8 layout need a server or workstation board that supports registered ECC memory.

How is the module installed and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, then confirm in BIOS that ECC and registered mode are enabled for the new stick.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。