暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

RIMLANCE

RIMLANCE RRD21300D8C2K32 32GB (2x16GB) DDR4 2666 CL19 ECC Registered RDIMM

SKU CH-YANQ-58VKX

32 GB dual-rank DDR4-2666 ECC registered RDIMM kit with CL19 latency for servers and workstations

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity supports larger workloads
  • Dual 16 GB modules populate two slots
  • DDR4 2666 speed moves data fast
  • ECC registered design corrects memory errors
  • 2 V operation keeps power draw low

Server DDR4 Kit

This RIMLANCE kit provides 32GB of DDR4 server memory in a matched pair of 16GB RDIMMs. It is built for administrators upgrading compatible DDR4 servers and workstations that require ECC registered modules.

ECC Registered Upgrade

The modules replace non-ECC or unbuffered DIMMs in systems that demand registered error-correcting memory for data integrity. The jump is worth it when workloads require the stability of 2Rx8 registered chips running at 2666MHz with CL19 timing.

288-Pin Installation

Installation follows standard 288-pin DDR4 RDIMM procedure at 1.2V; the keyed notch prevents misalignment. What usually goes wrong is purchasing registered memory for a platform that only accepts unbuffered UDIMMs, so verify the motherboard specification first.

特長

  • 32 GB capacity supports larger workloads
  • Dual 16 GB modules populate two slots
  • DDR4 2666 speed moves data fast
  • ECC registered design corrects memory errors
  • 2 V operation keeps power draw low

仕様

BrandRIMLANCE
ModelRRD21300D8C2K32
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset

この商品に関する質問

Will the 288-pin DDR4 RDIMM modules fit my server's memory slots?

Yes, each 16 GB module uses the standard 288-pin DDR4 RDIMM form factor used by compatible DDR4 servers and workstations.

What is the correct way to install the 2Rx8 registered DIMMs and what step is often missed?

Power down the server, open the chassis, align the module key with the slot, press firmly until both retention clips click, then verify in BIOS that all 32 GB are detected at 2666 MHz.

When should I expect to replace these ECC registered modules?

They are built with major-brand DRAM chips and covered by a lifetime replacement warranty, so replacement is only needed if a module fails or capacity requirements change.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。