暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 RDIMM sticks with gold contacts and black heat spreaders

RIMLANCE

RIMLANCE RRD21300S4C2K16 16GB (2x8GB) DDR4 2666 ECC Registered RDIMM

SKU CH-MAQ1-6N974

16 GB dual-channel DDR4 ECC registered memory kit running at 2666 MHz with CL19 latency for servers and workstations

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB dual-channel kit doubles throughput for multi-threaded server workloads
  • DDR4-2666 CL19 timing balances speed and latency for responsive data handling
  • ECC registered design detects and corrects single-bit errors to protect critical data
  • 2 V low-voltage operation reduces power draw and heat in dense racks
  • 288-pin RDIMM form factor fits standard DDR4 server and workstation slots

Server Memory Kit for DDR4 Platforms

This 16 GB kit contains two 8 GB registered ECC RDIMMs built for DDR4 servers and workstations. It runs at 2666 MT/s with CL19 latency at 1.2 V. The modules use 1Rx4 organisation and major-brand DRAM chips.

Upgrade from Non-ECC or Lower-Capacity DIMMs

The jump is worthwhile when your workload demands error correction and registered signalling for data integrity. It replaces unbuffered or non-ECC memory that cannot meet server-class stability requirements.

Straightforward 288-Pin Installation

Align the notch with the motherboard key and press firmly until the latches click. The most common issue is mixing registered and unbuffered DIMMs on the same board, which prevents the system from posting.

特長

  • 16GB dual-channel kit doubles throughput for multi-threaded server workloads
  • DDR4-2666 CL19 timing balances speed and latency for responsive data handling
  • ECC registered design detects and corrects single-bit errors to protect critical data
  • 2 V low-voltage operation reduces power draw and heat in dense racks
  • 288-pin RDIMM form factor fits standard DDR4 server and workstation slots

仕様

BrandRIMLANCE
ModelRRD21300S4C2K16
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

この商品に関する質問

Will the 288-pin DDR4 2666 RDIMM kit fit my server's DIMM slots?

The kit uses the standard 288-pin DDR4 form factor and runs at 1.2 V. It fits any server or workstation slot designed for DDR4 registered memory.

What is the correct way to install the 2x8 GB registered modules, and what step is often missed?

Power down the system, open the chassis, align each module's notch with the slot key, and press firmly until both retention clips lock. The step often missed is confirming the motherboard requires registered ECC memory before purchase.

How long can the 1Rx4 ECC registered modules run before they need replacement?

The modules are built with major-brand DRAM chips and tested for reliability. No scheduled replacement interval exists; they remain in service until a memory error appears or a capacity upgrade is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。