BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
RIMLANCE
A 32 GB dual-channel DDR4 kit running at 2933 MHz with CL21 latency and 1.2 V operation
This RIMLANCE kit provides 32GB of DDR4 desktop memory across two 16GB UDIMM modules. It is built for users who need more headroom for multitasking and memory-intensive applications on a standard dual-channel platform.
The kit replaces lower-capacity or slower DDR4 sticks when a system has free 288-pin slots and the memory controller supports 2933MHz operation. The jump is worth it when current memory limits cause swapping or when a board can run this speed natively without downclocking.
Modules insert into standard 288-pin DDR4 slots and run at 1.2V without extra configuration on most boards. What usually goes wrong is mixing ranks or speeds that force the controller to drop frequency, or populating slots in the wrong order for dual-channel mode.
| Brand | RIMLANCE |
|---|---|
| Model | RUD23400D8C2K32 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Yes, each 16 GB module uses the standard 288-pin DDR4 UDIMM form factor that fits any desktop board with DDR4 slots.
Insert both modules into the same-coloured DIMM slots — usually slots 2 and 4 — pressing down firmly until the retention clips click on both ends.
No firmware is required; the modules run at 1.2 V with CL21 timings automatically, and only occasional dust removal from the gold contacts is needed.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?