暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Rosewill

Rosewill VMG1000 1000W ATX 3.1 power supply

SKU CH-XDBD-3P1DF MPN VMG1000

A 1000 W ATX 3.1 power supply with full modular cables, 80 PLUS Gold efficiency, a 120 mm FDB fan and a native 12V-2x6 connector for PCIe 5.1 graphics cards in a compact 140 mm chassis

  • TypeATX 3.1 Compatible
  • Maximum Power1000 W
  • Fans1 x 120mm FDBfan
  • PFCActive
  • Main Connector20+4Pin
  • +12V RailsSingle

Options ATX 3.1 80+ Gold (1000W)

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • 1000 W output powers demanding builds
  • 80 PLUS Gold certification delivers up to 85 % efficiency
  • Full modular cabling keeps the case tidy
  • 120 mm FDB fan runs quietly under load
  • Native 12V-2x6 connector supports PCIe 5.1 graphics cards

1000 W ATX 3.1 power supply

The Rosewill VMG1000 delivers 1000 W of continuous power and meets the ATX 3.1 specification. It is built for systems that need a single 12 V rail and a native 12+4 pin 12V-2x6 connector for modern graphics cards. Full modular cabling keeps the interior tidy.

Thermals noise and 80 PLUS Gold efficiency

A 120 mm FDB fan and a steel shell with large vents move air through the 140 mm deep chassis. The unit carries 80 PLUS Gold certification with up to 85 % typical efficiency. Active PFC and a 16 ms minimum hold-up time help maintain stable output during normal operation.

Sustained load and excursion capability

The platform is rated for 235 % power excursion and 300 % GPU power excursion, allowing short bursts well above the 1000 W rating. A six-protection suite covers over-current, over-power, over-temperature, over-voltage, short-circuit and under-voltage conditions. The dedicated 12V-2x6 cable can supply 600 W directly to a compatible GPU.

特長

  • 1000 W output powers demanding builds
  • 80 PLUS Gold certification delivers up to 85 % efficiency
  • Full modular cabling keeps the case tidy
  • 120 mm FDB fan runs quietly under load
  • Native 12V-2x6 connector supports PCIe 5.1 graphics cards

仕様

BrandRosewill
ModelVMG1000
TypeATX 3.1 Compatible
Maximum Power1000 W
Fans1 x 120mm FDBfan
PFCActive
Main Connector20+4Pin
+12V RailsSingle
SATA Power Connector6
CrossFireCrossFire Ready
Max PSU Length140 mm
ModularFull Modular
Hold-up Time16ms min.
EfficiencyUp to 85%
Energy-Efficient80 PLUS GOLD Certified
Over Voltage ProtectionYes
Overload ProtectionYes
Output+3.3V@18A, +5V@18A, [email protected] , [email protected] , +5VSB@3A
Connectors1 x 20+4-Pin Main Connector
2 x 4+4-Pin ATX12V / EPS12V Connector
3 x 6+2-Pin PCI-E Connector
1 x 12+4-Pin 12V-2x6 Connector
8 x 15-Pin SATA Connector
4 x 4-Pin Peripheral Connector
配送重量2.52 kg
梱包サイズ273 × 203 × 114 mm

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 12V-2x6 cable for my PCIe 5.1 graphics card, and which step do people miss?

Connect the 12+4-pin 12V-2x6 cable from the PSU directly to the GPU; the step often missed is seating the connector fully until the latch clicks, ensuring all 12 power pins and 4 sense pins make contact.

What maintenance or replacement will the 120mm FDB fan need later?

The fluid-dynamic-bearing fan is rated for long life; typical maintenance is occasional dust removal with compressed air, and replacement is only needed if bearing noise or speed drop appears after many years.

What limit shows up first during sustained 1000W loads?

The 16ms minimum hold-up time is the first hard limit; if AC input drops, output voltage is guaranteed for at least 16ms before falling out of regulation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。