sakose 12025-LED 120mm case fan 15 LED 1100 RPM 18 dBA 3 pack
- White
- White
sakose
Four 120 mm hydraulic-bearing fans with 15 red LEDs each, 1100 RPM and 18 dBA noise, plus anti-vibration rubber pads
Option 4 Heads
This set contains four 120 mm case fans with red LED lighting. Each unit uses a hydraulic bearing and a 4-pin Molex connector running at 12 VDC. The pack is aimed at builders who want coordinated lighting and basic airflow across multiple chassis positions.
The fans draw power from a standard Molex 4-pin connector, so they run at a fixed 1100 RPM with no PWM control. Noise is rated at 18 dBA, and airflow is capped by the single-speed design. Builders who need variable speed or motherboard fan headers cannot adjust these units.
Anti-vibration rubber pads are included for each fan, simplifying mounting on standard 120 mm hole patterns. The fixed Molex plug requires a free power-supply lead; cable routing can be tight in smaller cases. No fan-speed signal wire is present, so the BIOS will report zero RPM.
| Brand | Sakose |
|---|---|
| Color | Red |
| LED | Red |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The listing only supplies the four-pack, so you receive four identical 120 mm fans with red LEDs in one box.
At 1100 RPM the fan moves a large volume of air through its nine curved blades while staying near 18 dBA.
The 12 VDC Molex 4-pin connection runs the fan at fixed 1100 RPM; motherboard PWM control is not supported.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?