暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SAMSUNG

SAMSUNG 32GB DDR4-2666 LP ECC REG DIMM

SKU CH-26RX-RYHEP

32 GB DDR4-2666 registered ECC module runs at 1.20 V for server workloads

  • Capacity32GB
  • SpeedDDR4 2666 (PC4 21300)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity supports large server workloads
  • DDR4 2666 (PC4 21300) speed delivers high throughput
  • Registered ECC design protects data integrity
  • Low-profile 1.20 V modules fit dense chassis
  • Supermicro certified for validated compatibility

32 GB DDR4-2666 ECC Registered Module

This 32 GB DDR4-2666 module targets servers and workstations that require error-correcting registered memory. The low-profile form factor fits dense chassis where vertical clearance is limited. It operates at the standard 1.20 V DDR4 voltage for broad platform compatibility.

Sustained Load Behaviour

Registered buffering reduces electrical load on the memory controller during continuous operation. ECC circuitry detects and corrects single-bit errors without halting the system. The DDR4-2666 rating (PC4 21300) maintains rated throughput across extended workloads.

Thermals Noise Power

Low-profile height improves airflow in tightly packed DIMM banks. Standard 1.20 V operation keeps power draw predictable under typical server loads. Passive operation eliminates fan noise, leaving thermal management to chassis airflow.

特長

  • 32 GB capacity supports large server workloads
  • DDR4 2666 (PC4 21300) speed delivers high throughput
  • Registered ECC design protects data integrity
  • Low-profile 1.20 V modules fit dense chassis
  • Supermicro certified for validated compatibility

仕様

Capacity32GB
SpeedDDR4 2666 (PC4 21300)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered

この商品に関する質問

How much power does a 32 GB DDR4-2666 registered ECC module draw at its rated 1.20 V during continuous operation?

The module runs at 1.20 V, which is the standard DDR4 voltage, so power draw stays within the normal range for 32 GB registered DIMMs under sustained load.

What motherboard features are required to use this registered ECC DDR4-2666 DIMM?

The board must support DDR4 registered ECC memory and have 288-pin DIMM slots; a workstation or server chipset that enables ECC and registered operation is necessary.

Can this low-profile registered ECC DIMM sit next to standard-height DDR4 modules in the same chassis?

Yes, the low-profile height lets it fit in tight server enclosures alongside taller DDR4 DIMMs without mechanical interference.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。