OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
SAMSUNG
8 GB DDR4 desktop memory module running at 2666 MHz with CL19 latency and 1.2 V operation
This 8GB DDR4 module runs at 2666MHz with CL19 latency and 1.20V operation. It uses a 1Rx8 unbuffered non-ECC design on a 288-pin PCB. The stick is built for standard desktop DIMM slots and carries Samsung DRAM components.
Verify that your board accepts DDR4 UDIMM modules and that the CPU memory controller supports 2666MHz operation. The module requires a standard 288-pin DDR4 slot and 1.20V supply. Confirm the platform can run non-ECC unbuffered memory at this speed before ordering.
Under continuous load the module maintains its 2666MHz data rate and CL19 timing at 1.20V. The unbuffered topology delivers consistent bandwidth for long rendering or compile sessions. Power draw stays at the rated voltage without thermal throttling on the DRAM chips.
| Brand | SAMSUNG |
|---|---|
| Model | M378A1K43CB2--CTD |
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered / Unregistered |
| Chipset | Samsung Chipset |
| Heat Spreader | No |
The listing shows one 8 GB UDIMM; no cables, brackets or additional modules are included.
This single-rank 1Rx8 module runs at CL19 and 1.2 V; choose it when your board specifies that timing and voltage.
The module is rated for 2666 MT/s at CL19; the final speed depends on the motherboard's memory controller and BIOS settings.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?