暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SAMSUNG

SAMSUNG M391A2K43BB1-CRC 16GB DDR4 2400 CL17 desktop RAM

SKU CH-PDYY-1A5NT MPN M391A2K43BB1-CRC

A 16GB DDR4 desktop module running at 2400MHz with CL17 latency and ECC error correction

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • ColorGreen
  • 16 GB capacity for demanding workloads
  • DDR4 2400 speed for responsive performance
  • CL17 latency for quick data access
  • ECC support for data integrity
  • 288-pin UDIMM form factor for desktop installation

16 GB ECC UDIMM for DDR4 Servers

This 16 GB DDR4 module uses Samsung chips and runs at 2400 MHz with a CL17 latency. It is built as an unbuffered UDIMM for systems that accept ECC memory on a 288-pin desktop form factor.

Green PCB and 288-pin UDIMM layout

The green circuit board carries a 1Gx8 organisation and fits standard DDR4 UDIMM slots. Unbuffered registration means the module connects directly to the memory controller without an extra register chip.

Verify ECC support and DDR4 slot availability

Check that your motherboard or server board explicitly supports unbuffered ECC UDIMMs before ordering. The board must provide a free 288-pin DDR4 slot and run memory at the required PC4-19200 or PC4-21300 specification.

特長

  • 16 GB capacity for demanding workloads
  • DDR4 2400 speed for responsive performance
  • CL17 latency for quick data access
  • ECC support for data integrity
  • 288-pin UDIMM form factor for desktop installation

仕様

Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
ColorGreen

この商品に関する質問

What does the PC4-21300 rating on this DDR4 2400 module cap in practice?

The PC4-21300 label corresponds to a 2400 MHz data rate with CL17 timing, so bandwidth is limited to that specification.

What physical slot and pin count does the 288-pin UDIMM require?

It fits a standard desktop DDR4 DIMM slot with 288 contacts; the green PCB and 1Gx8 chip layout match the M391A2K43BB1-CRC form factor.

How is the unbuffered ECC stick installed, and what step do builders often miss?

Align the notch with the slot key, press firmly until both retention clips click, then enable ECC in the system BIOS or the module will run non-ECC.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。